ο Handheld\lightweight and convenience for carrying
ο 45dB high dynamic range
ο ≤0.8m extra-short event dead zone
ο 0.05m high distance resolution,128k sampling points
ο With automatic measurement mode,one-button operating
ο Test up to four wavelengths with a single unit
ο Communication light check automatically
ο Remote communication control via Ethernet
ο Double USB interfaces, supporting USB stick and printer and direct cable download to PC via ActiveSync
ο Supporting Bellcore GR196 file format in writing or reading
ο Built-in lithium battery with high capacity for over 8 hours of operating life
ο Visible fault locating (VFL) and optical power meter
ο Universal FC/PC,FC/SC,FC/ST connector type, it's convenient for surface cleaning
ο Unique function of updating application software on-line
Extra-short event dead zone
Due to its high resolution,JX8002-3103 OTDR has 1m extra-short event dead zone, which is suitable for testing short optical fiber and pigtail optical fiber.
JX8002 -3103 can quickly determine and locate the events and faults in trace precisely, then lists all events in even table, so it's very useful to maintainers to improving efficiency and it's unnecessary to know about the relative background knowledge.
High-speed auto measurement
The function of auto measurement of JX8002-3103 OTDR makes it unnecessary to operator to know about the further details of operating. The operation becomes very simple: after connect the fiber, only press[Start],then the trace measured is displayed and the events are listed on screen in a few seconds, now, you can view the trace and event table.
The function of auto measurement of JX8002-3103 OTDR makes it unnecessary to operator to know about the further details of operating. The operation becomes very simple: after connect the fiber, only press[Start],then the trace measured is displayed and the events are listed on screen in a few seconds, now, you can view the trace and event table.
Unique PON testing capability
JX8002-3103 is ideal for access and FTTH network testing, it enable you to test through 1x32 even 1x64 splitters for PON(passive optical network) testing.
JX8002 -3103 offers an exceptional 1m event dead zone and 0.05m high distance resolution, with which you can characterize all events between the transmitter and the central office's fiber distribution panel.
Convenient VFL function
he built-in 650nm visual fault locator (VFL) is ideal for identifying bad splice, bad connector, break or macro bend easily. The standard VFL with more than 2 milliwatt output power is factory installed in JX8002-3103 , which the operation distance is in excess of 5 kilometers.
Communication Light Check
When measuring a fiber in service, the measuring result by an OTDR is not precise, and there is a potential risk of permanent damage to the internal photoelectric of OTDR receiver. To prevent these problems, JX8002 -3103
-3103 Multiple Wavelengths and Models
JX8002-3103 OTDR can provide any of single mode or multimode or both, designed to test FUT at up to four wavelengths in single unit, such as 850, 1300, 1310, 1383, 1490, 1550, 1625 and 1650nm wavelengths, with which JX8002 -3103
Abundant external interface
has abundant external interface, such as USB, Min-USB, Ethernet, earphone and SD, due to these, it can provide the following functions:
ο Training via multimedia for operators, which can enable you become a measuring expert within short time.
ο Implementing remote controlling through Ethernet, troubleshooting from long distance for fiber under test.
ο Printing trace and event table JX8002-3103 ο Updating application software on-line
he built-in 650nm visual fault locator (VFL) is ideal for identifying bad splice, bad connector, break or macro bend easily. The standard VFL with more than 2 milliwatt output power is factory installed in JX8002-3103 , which the operation distance is in excess of 5 kilometers.
Communication Light Check
When measuring a fiber in service, the measuring result by an OTDR is not precise, and there is a potential risk of permanent damage to the internal photoelectric of OTDR receiver. To prevent these problems, JX8002 -3103
-3103 Multiple Wavelengths and Models
JX8002-3103 OTDR can provide any of single mode or multimode or both, designed to test FUT at up to four wavelengths in single unit, such as 850, 1300, 1310, 1383, 1490, 1550, 1625 and 1650nm wavelengths, with which JX8002 -3103
Abundant external interface
has abundant external interface, such as USB, Min-USB, Ethernet, earphone and SD, due to these, it can provide the following functions:
ο Training via multimedia for operators, which can enable you become a measuring expert within short time.
ο Implementing remote controlling through Ethernet, troubleshooting from long distance for fiber under test.
ο Printing trace and event table JX8002-3103 ο Updating application software on-line
