Technical parameters:
1 Coil thickness of raw materials:0.1-0.65mm ;
2 Raw materials Material: cold-rolled plate, galvanized plate Q235A
3 Raw material coil width :800-1300mm;
4 Raw material coil inside diameter: φ508;
5 Raw material coil outer diameter: Dmax = φ1800mm ;
6 Raw material coil weight: 10T;
7 Cross-section width: 1300mm;
Quality requirements: the length of Tolerance: ± 0.5mm/2000mm;Diagonal tolerance: ± 1.0mm/2000mm;
The flatness tolerance: better than the national standard of GB709-88
8 Material of leveling roller: 42CrMo;
9 Leveler roll diameter: φ50 mm; surface hard chrome plating, hardness HRC55-60 °;
10 Leveling speed: 0-60m/min;
11 The oiling of flattening host the concentrated oiling way;
12 Power supply: 440V three-phase, 50Hz.
13 Feed direction: from the operating surface, feed left, right out of the material
14 Land: 9 m (width) x 32 meters (length)
The unit Total power: 115.4kw
\ Process:
The shovel head → → haul → Volume → decoiling leveler → Storage → → oriented fine straightening and cut to length → crosscutting → the belt conveyor → blanking → → the materials the car → bundled lifting (hydraulic system, pneumatic system then expected,electronic control system)
\Each part of the crew:
1. Feeding cart 1set
2. The hydraulic rose un coiler 1set
3.Hydraulic shovel head institutions 1set
4.Leveling machine 1set
5Material storage bridge 1set
6Oriented in institutions 1set
7Fine straightening cut to length 1set
8Pneumatic Crosscut Machine 1set
9Belt conveyors 1set
10Pneumatic Blanking rack 1set
11"X" elevating trolley 1set
12. Discharging platform 1set
13Electronic control system 1set
14Hydraulic and pneumatic systems 1set
