continuous screen changr-double piston hydraulic screen changer
This double working position hydraulic screen changer is designed to work with two channels inside. It contains two screens that work at the same time: one screen works, while the other one is changed during the process of screen replacements, thus the replacement without machine halt is ensured and no interrupt of material fluid and of production will occur. Therefore, the screen changer meets the customers' requirement of higher productivity and better quality.
The double piston Screen Changer allows for filtration of most all polymers without interrupting production during a screen change. The Screen Changer consists of two pistons with each containing a filter cavity. When a screen change is required, one of the pistons is moved out of the housing while the other remains in the operating position. The dirty screen pack is removed and replaced with a new one. The piston is then moved back into the housing to its venting stages before resuming operation. These steps are then repeated for the other piston. This concept allows for continuous filtration with no interruption or loss of production.
Application
.sheet
.coating
.pipe
.compounding
.wire and cable
.tubing
.textiles(fibers and nonwovens)
.EVA, hot melt adhesive and PSA
.pelletizing(strands and underwater)
.recycling of most polymers
.blown film and cast film
.corrosive and degradable materials
.sheet
.coating
.pipe
.compounding
.wire and cable
.tubing
.textiles(fibers and nonwovens)
.EVA, hot melt adhesive and PSA
.pelletizing(strands and underwater)
.recycling of most polymers
.blown film and cast film
.corrosive and degradable materials
.Textiles (fibers and nonwovens)