DST(Drill Stem Testing) Tools 7" Circulating Valve
Size: 2 3/8",4 1/2 " to 5",51/2"to 6 5/8",7"to 7 5/8",8 5/8" to 13 3/8"
Usage:oil well testing
Type: locked-open/locked-closed valve
Product model:RTTS Circulating Valve
Service: H2S, CO2
Working condition: High pressure high temperature(HPHT)
Working pressure: 10000psi ~ 15000psi
Condition: New
Standard: API
Briefly Introduction
The RTTS circulating valve is a locked-open/locked-closed valve that serves as both a circulating valve and bypass. The clearance between the RTTS packer (or any hookwall packer) and the casing ID is relatively small. To reduce the effect of fluid-swabbing action when the tool is run in or pulled out of the hole, a packer bypass is generally used.
Features and Benefits
• The valve can be locked closed when the packer is unset to reverse fluid around the bottom of the packer.
• The tool's full opening allows tubing-type guns and other wireline equipment to pass.
Operation
The RTTS circulating valve is automatically locked in the closed position when the packer is set. During testing and squeezing operations, the lock helps prevent the valve from being pumped open. A straight J-lot in the locked-open position can be used with the straight J-slot (optional) in the packer body. This combination eliminates the need to turn the tubing to close the circulating valve or reset the packer after the tubing has been displaced with cement.
The RTTS circulating valve can be run directly above the packer body or further up the workstring.
When placed in the hole, the valve must be in the lockedopen position. The J-slot in the packer-body drag block (or drag sleeve) must also be placed in the unset position.
When the circulating valve is opened to come out of the hole, the tubing is lowered, turned to the right, and picked up.
Specifications:
1. Halliburton type, all could change with Halliburton parts.
2. All equipments are produced according to API standard NACE MRO175-2002
Below are specfor you reference:
Nominal Size in. | OD in. (cm) | ID in. (cm) | End Connection | Length in. (cm) | Tensile Rating** lb (kg) | Burst Rating" psi (kPa) | Collapse Rating**psi (kPa) |
2 3/8 | 1.68 (4.27) | 0.68 (1.73) | 1.05 10 RD | 18.42 (46.79) | 31,900 (14 470) | 11,600 (79 979) | 9,900 (68 25a) |
4 1/2 to 5 | 3.60 (9.14) | 1.80 (4.57) | 2 3/8 EUE | 32.2 (81.8) | 85,000 (38 556) | 10,100 (66 637) | 10,700 (73 774) |
51/2 to 6 5/8 | 4.18 (10.62) | 1.99 (5.05) | 2 3/8 EUE 2 7/8 EUE | 31.9 (81.03) | 150,700 (68 358) | 10,000 (68 900) | 14,200 (97 906) |
7 to 7 5/8 | 4.87 (12.37) | 2.44 (6.19) | 7/8 EUE 31/2 IF 7/8 CAS | 32.9 (83.57) | 148,800 (67 496) | 10,000 (68 900) | 10,100 (69 637) |
8 5/8 to 13 3/8 | 6.12 (15.54) | 3.00 (7.62) | 4 1/2 IF T.J. | 38.4 (97.54) | 311,400 (141 251) | 10,500 (72 395) | 10,100 (69 637) |
There is draft for your reference. 
Company Introduction
Xi'an Kingwell Oilfield Machinery Co.,Ltd is a professional supplier for oilfield products according to the API standard.
Our products have exported to USA, Canada, Egypt, India and UEA, etc with 40 FCL containers per month. Now, with high quality and short supply and good service, our products have got good reputation home and abroad .
Here we got some prise as follows.
'
Design & Development
Kingwell has an ongoing relationship with Xi'an Petroleum University and built up long term cooperation with China Aerospace Group for more than 10 years. Design Department is familiar with CAD and Pro-E facilities and has on rolls qualified & experienced engineers. Now, they are engaged in development of new products as required in the market place. Kingwell' products are validated in-house in a Test Well, a Sub-surface Type Test Facility with simulated well conditions up to 15000 psi Differential pressure , 400°F and Max 450°F.
Quality Systems
A well-established Quality System from Materials receipt to Products delivery ensures consistent quality at all levels of the activity. QMS Procedures & Measurements are tailored to establish high standards of Quality Assurance in the Operations. The Company maintains the 100% Traceability records as per API requirements &NACE MR 0175-2002 Standards and complies with all the legal, statutory and regulatory
.Quality control of the spare parts processing:
1) Spare parts processing control:In strict accordance with the process and traceability requirements, a test, mark and record of dimension, geometric tolerance and for every piece and every procedure will be conduct.
2) Heat treatment quality control: We have two high temperature heat treatment furnaces that are mainly used for stainless steel and other special material heat treatment. For other materials, we entrust Baoji Petroleum Machinery Company Heat Treatment Plant to do the heat treatment.For the inspection of the heat treatment, we are equipped with the special inspection machine such as gantry hardness tester, digital universal tensile tester etc.
Quality control of the tool assembly and testing process
1) Test equipment: in addition to the conventional hydraulic test pump, tensile testing machine, we also have a pressure sensor and data acquisition system which can accurate and clear record each step of the test.
2) Technical documents: We have a test acceptance list for every tool test that clearly guides the each step of the test.
3) Assembly test: A special inspector will supervise the whole assembly process.
The following is the picture of Product Processing
Inspection and Test Facilities
We own the world-class facilities with professional laboratory technicians. The main facilities are Surface Testing (Hydraulic Testing Unit), high temperature heat treatment furnaces, API Gages (Master & Working), Profile Projector, tensile testing machine, pressure sensor and data acquisition system, Universal Testing Machine, Hardness Tester, Nitrogen Pump, Function Test Pump, Ultrasonic Thickness Tester etc. All the goods must be tested by several processes and must be qualified when packed.
Product delivery
Payment:TT/LC:30% advance payment.70%before shipment
Warranty: Warranty period is 1 year after installation.
Origin: China
Minimum order: 1 set
Packaging: wood case or steel carton
Delivery Date: within 1-2 month(s) after receiving prepayment
Logo: KW, we can produce according to customer requirements.
Technical Documents: We can provide technical documents according to your requirements.
Additional service: Customers are served to test our products in our factory upon request.
The followings are some pictures about product packaging
Service
We believe in Customer delight, achieved by the supply of Quality Products & Services and Continual Improvement in our Manufacturing Processes for timely delivery at competitive prices. We work in a professional, competitive, and cost-effective manner consistent with the Customer requirement
Any enquiry of above products or relative parts, PLS feel free contact back, and we will offer you a good price and show you our best service.
