DST Tools 5'' RTTS Circulating Valve(Drill stem testing)
Size: 2 3/8",4 1/2 " to 5",51/2"to 6 5/8",7"to 7 5/8",8 5/8" to 13 3/8"
Usage:oil well testing
Type: locked-open/locked-closed valve
Product model:RTTS Circulating Valve
Service: H2S, CO2
Working condition: High pressure high temperature(HPHT)
Working pressure: 10000psi ~ 15000psi
Condition: New
Standard: API
Briefly Introduction
The RTTS circulating valve is a locked-open/locked-closed valve that serves as both a circulating valve and bypass. The clearance between the RTTS packer (or any hookwall packer) and the casing ID is relatively small. To reduce the effect of fluid-swabbing action when the tool is run in or pulled out of the hole, a packer bypass is generally used.
Features and Benefits
• The valve can be locked closed when the packer is unset to reverse fluid around the bottom of the packer.
• The tool's full opening allows tubing-type guns and other wireline equipment to pass.
Operation
The RTTS circulating valve is automatically locked in the closed position when the packer is set. During testing and squeezing operations, the lock helps prevent the valve from being pumped open. A straight J-lot in the locked-open position can be used with the straight J-slot (optional) in the packer body. This combination eliminates the need to turn the tubing to close the circulating valve or reset the packer after the tubing has been displaced with cement.
The RTTS circulating valve can be run directly above the packer body or further up the workstring.
When placed in the hole, the valve must be in the lockedopen position. The J-slot in the packer-body drag block (or drag sleeve) must also be placed in the unset position.
When the circulating valve is opened to come out of the hole, the tubing is lowered, turned to the right, and picked up.
Specifications:
1. Halliburton type, all could change with Halliburton parts.
2. All equipments are produced according to API standard NACE MRO175-2002
Below are specfor you reference:
Nominal | OD in. | ID in. (cm) | End Connection | Length in. (cm) | Tensile Rating** lb (kg) | Burst Rating" psi (kPa) | Collapse Rating**psi (kPa) |
2 3/8 | 1.68 (4.27) | 0.68 (1.73) | 1.05 10 RD | 18.42 (46.79) | 31,900 (14 470) | 11,600 (79 979) | 9,900 (68 25a) |
4 1/2 to 5 | 3.60 (9.14) | 1.80 (4.57) | 2 3/8 EUE | 32.2 (81.8) | 85,000 (38 556) | 10,100 (66 637) | 10,700 (73 774) |
51/2 to 6 5/8 | 4.18 (10.62) | 1.99 (5.05) | 2 3/8 EUE 2 7/8 EUE | 31.9 (81.03) | 150,700 (68 358) | 10,000 (68 900) | 14,200 (97 906) |
7 to 7 5/8 | 4.87 (12.37) | 2.44 (6.19) | 7/8 EUE 31/2 IF 7/8 CAS | 32.9 (83.57) | 148,800 (67 496) | 10,000 (68 900) | 10,100 (69 637) |
8 5/8 to 13 3/8 | 6.12 (15.54) | 3.00 (7.62) | 4 1/2 IF T.J. | 38.4 (97.54) | 311,400 (141 251) | 10,500 (72 395) | 10,100 (69 637) |
Company Introduction
Xi'an Kingwell Oilfield Machinery Co.,Ltd is a professional supplier for oilfield products according to the API standard.
Our products have exported to USA, Canada, Egypt, India and UEA, etc with 40 FCL containers per month. Now, with high quality and short supply and good service, our products have got good reputation home and abroad .
Here we got some prise as follows.
Certifications
Kingwell is a CNPC & SINOPEC & BV certified company, having all the Quality Systems in place for design, planning, manufacturing and quality monitoring & traceability to ensure our products match the highest quality standards.
We test our products strictly according to the NACE MR 0175-2002 Standard and our quality assurance period is 12 months.
Certificates endorsed by DNV/BV/ABS and Documents we can supply with the shipments:
1. Pressure Test Certificate with Graph and time recorded.
2. Function Test
3. Rubber Products NACE Compliance
4. Material Mill Certificate and treatment characteristics
5. H2S Compliance
6. Service Manual
7. Parts Manual
8. Testing Procedures.
9. Open up type tool drawing for dressing purpose– if any.
Design & Development
Kingwell has an ongoing relationship with Xi'an Petroleum University and built up long term cooperation with China Aerospace Group for more than 10 years. Design Department is familiar with CAD and Pro-E facilities and has on rolls qualified & experienced engineers. Now, they are engaged in development of new products as required in the market place. Kingwell' products are validated in-house in a Test Well, a Sub-surface Type Test Facility with simulated well conditions up to 15000 psi Differential pressure , 400°F and Max 450°F.
Inspection and Test Facilities
We own the world-class facilities with professional laboratory technicians. The main facilities are Surface Testing (Hydraulic Testing Unit), high temperature heat treatment furnaces, API Gages (Master & Working), Profile Projector, tensile testing machine, pressure sensor and data acquisition system, Universal Testing Machine, Hardness Tester, Nitrogen Pump, Function Test Pump, Ultrasonic Thickness Tester etc. All the goods must be tested by several processes and must be qualified when packed.
Training and Field Supports
We have a team of well qualified and experienced field support personnel for Training. According to customer's requirements, we provide operation training service for our customers who purchase our products.
Generally speaking, our customer training mainly includes followings:
1) To know the basic knowledge of the products, such as the usage, the working environments, the working principles, the structure, ect.
2) To learn the operation and use of products.
3) To master the basic requirement of designs of tool strings and of testing operation.
Service
We believe in Customer delight, achieved by the supply of Quality Products & Services and Continual Improvement in our Manufacturing Processes for timely delivery at competitive prices. We work in a professional, competitive, and cost-effective manner consistent with the Customer requirement
