10Gbps Dual Port PCI-E Fiber Nic Card of SFT, ALB with Intel® 82599ES Ethernet Controls
10G (PCI-E) Dual Fiber NIC Features:
-
Adapter fault tolerance (AFT)
-
Switch fault tolerance (SFT)
-
Adaptive load balancing (ALB)
Teaming support :
-
IEEE 802.3ad (link aggregation control protocol)
-
Test switch configuration
-
PCIe Hot Plug*/Active peripheral component interconnect (PCI)
-
IEEE 802.1Q* VLANs
-
IEEE 802.3 2005* flow control support
-
Tx/Rx IP, TCP, & UDP checksum offloading (IPv4, IPv6) capabilities (Transmission control protocol (TCP), user datagram protocol (UDP), Internet protocol (IP)
-
IEEE 802.1p*
-
TCP segmentation/ large send offload
-
MSI-X supports Multiple Independent Queues
-
Interrupt moderation
-
IPv6 offloading — Checksum and segmentation capability extended to new standard packet type
Speed/Port |
10Gbps - Fiber for Servers and Workstations |
Ethernet Controller(s) |
Intel® 82599ES |
Connector & Cable Medium |
LC Fiber Optic |
Cabling Type |
MMF 62.5/50 µm, up to 300 m |
Slot Type, Maximum Bus Speed & Slot Width |
PCI Express* 2.0 5.0 GT/s x 8 Lane |
Ports |
Dual Port |
Bus type |
PCI Express 2.0 (5 GT/s) |
Bus width |
4-lane PCI Express and 8-lane PCI Express |
Physical Layer Interface |
10GBASE-SR 10GBASE-LR |
Data rate supported per port: |
Optical: 1 GbE/10 GbE Direct Attach: 10 GbE |
Network Standards |
IEEE 802.3 SFP+ 10GBASE-SR |
Interrupt levels |
INTA, MSI, MSI-X |
Intel® VT for Connectivity1 |
Virtual Machine Device Queues (VMDq) Virtual Machine Direct Connect (VMDc) |
Security Features |
IPSEC/LinkSec |
IWARP/RDMA |
NA |
Typical power consumption |