10Gbps Dual Port PCI-E Fiber Nic Card of SFT ALB with Intel 82599ES Ethernet Controls
10G (PCI-E) Dual Fiber NIC Features:
- Adapter fault tolerance (AFT)
- Switch fault tolerance (SFT)
- Adaptive load balancing (ALB)
Teaming support :
- IEEE 802.3ad (link aggregation control protocol)
- Test switch configuration
- PCIe Hot Plug*/Active peripheral component interconnect (PCI)
- IEEE 802.1Q* VLANs
- IEEE 802.3 2005* flow control support
- Tx/Rx IP, TCP, & UDP checksum offloading (IPv4, IPv6) capabilities (Transmission control protocol (TCP), user datagram protocol (UDP), Internet protocol (IP)
- IEEE 802.1p*
- TCP segmentation/ large send offload
- MSI-X supports Multiple Independent Queues
- Interrupt moderation
- IPv6 offloading — Checksum and segmentation capability extended to new standard packet type
Speed/Port | 10Gbps - Fiber for Servers and Workstations |
Ethernet Controller(s) | Intel® 82599ES |
Connector & Cable Medium | LC Fiber Optic |
Cabling Type | MMF 62.5/50 µm, up to 300 m |
Slot Type, Maximum Bus | PCI Express* 2.0 |
Ports | Dual Port |
Bus type | PCI Express 2.0 (5 GT/s) |
Bus width | 4-lane PCI Express and 8-lane PCI Express |
Physical Layer Interface | 10GBASE-SR 10GBASE-LR |
Data rate supported per port: | Optical: 1 GbE/10 GbE Direct Attach: 10 GbE |
Network Standards | IEEE 802.3 SFP+ 10GBASE-SR |
Interrupt levels | INTA, MSI, MSI-X |
Intel® VT for Connectivity1 | Virtual Machine Device Queues (VMDq) |
Security Features | IPSEC/LinkSec |
IWARP/RDMA | NA |
Typical power consumption | Maximum Power10.7 W |
Operating temperature | 0° C to 55° C (32° F to 131° F) |
Air Flow | Minimum of 100 LFM required |
Storage temperature | -40° C to 70° C (-40° F to 158° F) |
Storage humidity | 90% non-condensing relative humidity at 35° C |
LED Indicators | LINK (solid) and ACTIVITY (blinking) |