Black 2.54 mm DIP switch long pin header

Black 2.54 mm DIP switch long pin ,with pitch 2.54mm,the pin header is long,we also have short pin header MX1027B.

1. Picture of Black 2.54 mm DIP switch long pin header

2. Datasheet of 2.54mm pitch black long pin header dip switch tact switch

3. Details of Black 2.54 mm DIP switch long pin header

    

     1).Material:

     a.base:UL94V-0 PBT Thermoplastic black

     b.cover:UL94V-0 PBT Thermoplastic black

     c.button:UL94V-0 PBT Thermoplastic white

     d.terminal:copper alloy plating

     2).Mechanical:

     a.operating force:0.2kgf(max)

     b.stroke:0.60mm

     c.operation temp:-30℃~+85℃

     d.storage temp:-40℃~+85℃

     3).Electrical:

     a.electrical life:2000 operations per switch 24VDC,25mA

     b.Non-switching rating:100mA,50VDC

     c.Switching rating:25mA,24VDC

     d.the contact impedance A:initial value of the maximum 50mΩ, B testing after the maximum 100mΩ.

     e.insulation resistance:(at 500VDC) 100mΩ min

     f.dielectric strength:300VAC/1minute

     g.capacitance:Max 5 pF

     h.the loop:single contact single selection

     4).the loop:single contact single selection:

     a.for best results,please follow these recommendation:keep all swith contacts in their "OFF" position for all operations

     b.wave soldering:recommended solder temperature at 250±5℃,less 20 seconds.

     c.hand welding:use 30 watt iron control temperature at 270℃.the welding time is about 2 seconds.

     d.cleaning:cleaning process using ultrasonic method,can give better results,use steam mode,temperature should not exceed 51℃.

    5).Dimension
   

     

   Part number	Poles	A type (mm)	B type (mm)
   MX 1027-2P	2P	6.08	2.54
   MX 1027-3P	3P	8.62	5.08
   MX 1027-4P	4P	11.16	7.62
   MX 1027-5P	5P	13.70	10.16
   MX 1027-6P	6P	16.24	12.70
   MX 1027-7P	7P	18.78	15.24
   MX 1027-8P	8P	21.32	17.78
   MX 1027-9P	9P	23.86	20.32
   MX 1027-10P	10P	26.40	22.86
   MX 1027-11P	11P	28.94	25.40
   MX 1027-12P	12P	31.48	27.94

    

4. Package of 2.54mm pitch black long pin header dip switch tact switch

    1.we pack the DIP Switch with IC TUBE or Tape and Reel,so keep the goods are in high quality when  delivery.

    2.we pack the DIP SWITCH with two steps,inner is tube or tape and reel,outer is carton.

    3.we pack the DIP SWITCHas your special requirements.

    

5. It is dust-free workshop for Black 2.54 mm DIP switch long pin header

6. Noted:

   Dear friend,thank you very much for you pay attention to Terminal Blocks In Terminal Connectors, please feel free to contact Angelo Tse at any time,I will give you a quick reply and try my best to do all the thing well.