2.54 mm SMD Dip Switch Black short pin header

2.54 mm pitch SMD Dip Switch Black short pin header,the pitch is 2.54mm,the pin header is short,we also have long pin header,the color is black.

• Picture of 2.54 mm SMD Dip Switch Black short pin header

• Datasheet and Drawing of 2.54 mm SMD Dip Switch Black short pin header

• Discription of Pitch 2.54 mm SMD Dip Switch black short pin header

  
  

    1).Material:

    a.base:UL94V-0 PBT Thermoplastic black

    b.cover:UL94V-0 PBT Thermoplastic black

    c.button:UL94V-0 PBT Thermoplastic white

    d.terminal:copper alloy plating

    2).Mechanical:

    a.operating force:0.2kgf(max)

    b.stroke:0.60mm

    c.operation temp:-30℃~+85℃

    d.storage temp:-40℃~+85℃

    3).Electrical:

    a.electrical life:2000 operations per switch 24VDC,25mA

    b.Non-switching rating:100mA,50VDC

    c.Switching rating:25mA,24VDC

    d.the contact impedance A:initial value of the maximum 50mΩ, B testing after the maximum 100mΩ.

    e.insulation resistance:(at 500VDC) 100mΩ min

    f.dielectric strength:300VAC/1minute

    g.capacitance:Max 5 pF

    h.the loop:single contact single selection

    4).the loop:single contact single selection:

    a.for best results,please follow these recommendation:keep all swith contacts in their "OFF" position for all operations

    b.wave soldering:recommended solder temperature at 250±5℃,less 20 seconds.

    c.hand welding:use 30 watt iron control temperature at 270℃.the welding time is about 2 seconds.

    d.cleaning:cleaning process using ultrasonic method,can give better results,use steam mode,temperature should not exceed 51℃.

   5).Dimension  

  Part number	Poles	A type (mm)	B type (mm)
  MX 1027-2P	2P	6.08	2.54
  MX 1027-3P	3P	8.62	5.08
  MX 1027-4P	4P	11.16	7.62
  MX 1027-5P	5P	13.70	10.16
  MX 1027-6P	6P	16.24	12.70
  MX 1027-7P	7P	18.78	15.24
  MX 1027-8P	8P	21.32	17.78
  MX 1027-9P	9P	23.86	20.32
  MX 1027-10P	10P	26.40	22.86
  MX 1027-11P	11P	28.94	25.40
  MX 1027-12P	12P	31.48	27.94

• Similar products with SMD DIP switch 2.54mm pin spacing

  
  

  
  

  

  

• Packing of Pitch 2.54 mm SMD Dip Switch black short pin header

   1.we pack the DIP Switch with IC TUBE or Tape and Reel,so we can keep the goods are in high quality when delivery.

   2.we pack the DIP SWITCH with two steps,inner is tube or tape and reel,outer is carton.

   3.we pack the DIP SWITCHas your special requirements.

  
  

• Equipments

  
  

• Stock

  

• Our workers are producing 2.54 mm SMD Dip Switch Black short pin header

• 

  
  

• If you want to know more ,pls do not hesitate to contact with Angelo Tse at any time, we will answer you as soon as possible.