Heavy wall heat shrinkable tube (with adhesive)
Structure:
Heavy wall heat shrink tube is manufactured by co-extrusion polyolefin and environment friendly hot-melt adhesive. Designed to provide both insulation and sealing for protected.
Application:
Semi-rigid heavy wall polyolefin heat shrinkable tubing with hot melting adhesive protecting electrical splices, cable terminations and joints where electrical Insulation and waterproof are required.
Characteristics:
1.Shrink ratio:3:1
2.Minimum fully recovery tempertature:120C
3.Heavy wall, Semi-rigid, Insulate, and excellent sealing performance
4.Approvals: RoHS
5.Colors: Black, Red
Specification:
Normal size (mm)
| As supplied (mm)
| After recovered (mm) | *Style
| Standard length (mm) | |
Inside diameter (min.) | Inside diameter (Max.) | Wall thickness (mm)
| |||
9/3 | 9 | 3 | 1.8 | O | 1000-1500 |
13/4 | 13 | 4 | 2.4 | O | 1000-1500 |
22/6 | 22 | 6 | 2.7 | O | 1000-1500 |
33/8 | 33 | 8 | 3.2 | O | 1000-1500 |
40/12 | 40 | 12 | 4.1 | O | 1000-1500 |
45/12 | 45 | 12 | 4.1 | O | 1000-1500 |
55/16 | 55 | 16 | 4.1 | O | 1000-1500 |
75/22 | 75 | 22 | 4.1 | O | 1000-1500 |
85/25 | 85 | 25 | 4.3 | O | 1000-1500 |
95/30 | 95 | 30 | 4.3 | O | 1000-1500 |
105/30 | 105 | 30 | 4.3 | O | 1000-1500 |
130/36 | 130 | 36 | 4.3 | — | 1000-1500 |
160/50 | 160 | 50 | 4.3 | — | 1000-1500 |
180/50 | 180 | 50 | 4.3 | — | 1000-1500 |
200/60 | 200 | 60 | 4.3 | — | 1000-1500 |
Technical Data:
Property | Test Method | Typical Data |
Operating temperature | IEC 216 | -55 to +110℃ |
Tensile strength | ASTM D2671 | ≥14MPa |
Tensile strength after aging | ASTM D 2671/150℃, 168hrs. | ≥12MPa |
Elongation at break | ASTM D2671 | ≥400% |
Elongation at break after aging | 150℃ ,168hrs | ≥300% |
Density | ASTM D792 | 1.05g/cm3 |
Longitudinal shrinkage | UL224 | 0 to -10% |
Dielectric strength | IEC243 | ≥20kV/mm |
Volume resistance | IEC93 | ≥1014ΩNaN |
Eccentricity | ASTM D2671 | <30% |
Copper stability | ASTM D2671 | Pass |
Resistance to stress cracking (50℃) | ASTM D1693 | No Cracking |
Water absorption | ISO 62/23℃,14days | <0.15% |
Softening point | ASTM D E8 | 85℃ |
Peel strength (PE) | DIN 30672 | 4 N/cm |
Copper stability | ASTM D 2671 | Non-corrosive |
Resistance to fungus and decay | ISO 846 | Pass |
