Information of Low price new condition ce certification approved granite impact crusher
stone Impact Crusher is new-type high efficient crushing equipment. It is a kind of new product that adopts the latest manufacturing technology, unique structural design, combining the Industrial and mining conditions of sandstone industry. This Series equipment can crush all kinds of coarse, mid, and fine material which maximum feed size is less than 500mm, compression strength is not more than 350 Mpa (like: granite, limestone, concrete etc.) with the characteristics of small volume, cubic final product, simple structure, and large ratio of reduction (up to 40), low energy consumption, large productive capacity, even product size. The Impact Crusher is widely used in the field of ore crushing, railway, highway, energy, cement, chemicals, and construction etc. The material size discharged is adjustable, with diversified crushing specification.
Application of Low price new condition ce certification approved granite impact crusher
It is widely used in granite ,basalt ,limestone ,river gravel ,cement clinker ,quartz stone ,iron ore ,bauxite and other minerals ,fine crusher ,the mechanism is also used for artificial sand ,high-grade highways ,water conservancy ,airport ,construction ,cement ,refractory mmetallurgical and other industries ,producing high-quality stone.
Common problems and solution
Fault content | Possible cause | Solution |
1.Abnormal Vibration | 1.1 material is too large | 1.1 Checking the feed size |
1.2 uneven wear | 1.2 to replace the hammer | |
1.3 rotor imbalance | 1.3 Calibration balance, counter weight | |
1.4 basis of improper handling | 1.4 Checking the foot base and fastening, reinforced | |
2.Bearing heating | 2.1 Bearing lack oil | 2.1 timely refueling |
2.2 too much fuel | 2.2 Check the amount of oil | |
2.3 bearing damage | 2.3 Replacement bearings | |
2.4 superstructure tight | 2.4 adjusting bolt, an appropriate degree | |
3.The particle size is too large | 3.1 hammer wear | 3.1 U-turn or replace |
3.2 a large gap between hammer and back plate | 3.2 Adjusting the gap of 15-20mm | |
3.3 feed size is too large | 3.3 Control aniseed | |
4.Belt flip | 5.1 Belt Wear | 5.1 to replace the V-belt |
5.2 pulley assembly problems | 5.2 adjusted in the same plane | |
5.3 V-belt intrinsic quality | 5.3 Replacing |
Working principle of Low price new condition ce certification approved granite impact crusher
The Impact Crusher is to use impact energy to crush materials. When the impact crusher works, the motor drives the rotor to rotate with high speed. When the materials get into the area which the hammers affect, under the impact function of the hammer on the rotor at a high speed, the materials are thrown to the impact device continuously. And then the materials are rebounded from the impact liner to the area where the hammers effects for being recrushed, then discharged from the discharge port. Users can adjust the space between impact rack and rotor, and then get to the expected size. with high hardness, large block, and few stone powers.
Features of Low price new condition ce certification approved granite impact crusher
1, Heavy rotor design, more durable rotor, more powerful on crushing.
2, The whole bearing cast steel structure, with frame with more perfect. Enhance radial intensity housings.
3, unique plate hammer fixtures, the maintenance and remove is more convenient.
4, optimizing adjustment device back plate, adjust the more convenient.
5, bearing, strong, durable, repair the machine rate low.
6, in the hydraulic chamber structure, convenient maintenance.
7, in a new way, effectively increase the incoming material size, increase crushing ratio.
8, adjustment protection device, greatly increases the safety equipment.
Main technical parameters of Low price new condition ce certification approved granite impact crusher
Type | Spe. (mm) | Feed opening size (mm) | Max feed size (mm) | Capacity (t/h) | Power (kw) | Overall dimension (mm) | Weight (t) |
PF-0607 | 644×740 | 320×770 | 100 | 10-20 | 30 | 2010×1490×2600 | 6.5 |
PF-0807
| 850×700 | 400×730 | 300 | 15-30 | 30-45 | 2210×1490×2670 | 8.1 |
PF-1008 | 1000×800 | 400×830 | 300 | 30-50 | 37-55 | 2400×1558×2660 | 9.5 |
PF-1010 | 1000×1050 | 400×1080 | 350 | 50-80 | 55-75 | 2400×2250×2620 | 12.2 |
PF-1210 | 1250×1050 | 400×1080 | 350 | 70-120 | 110-132 | 2690×2338×2890 | 14.9 |
PF-1212 | 1250×1250 | 400×1300 | 350 | 100-150 | 132-160 | 2690×2508×2890 | 16.3 |
PF-1214 | 1250×1400 | 400×1430 | 350 | 130-180 | 132-160 | 2690×2688×2890 | 18.6 |
PF-1310 | 1300×1050 | 490×1170 | 400 | 80-140 | 110-160 | 2780×2478×2855 | 21.2 |
PF-1315 | 1320×1500 | 860×1520 | 500 | 160-250 | 180-260 | 3096×3273×2667 | 24.3 |
PF-1520 | 1520×2000 | 830×2050 | 700 | 300-550 | 315-440 | 3581×3560×3265 | 36.5 |
Our service:
1. Pre-sales services:
1) Select proper equipment model;
2) Design and manufacture products according to clients' special requirement;
3) Arrange for visiting our factory, assist them to handle relative procedure, such as visa.
2. Services during the sale:
1) Make sure goods prepared within delivery time;
2) Pre-check and accept products ahead of delivery;
3) Prepare documents required to help customer pass customs clearance;
4) Help clients to make Project evaluation and feasibility analysis and draft solving plans.
3. After-sales services:
1) Assist clients to prepare for the first construction scheme;
2) Install, debug and examine the equipment;
3) Train technical personnel the first-line operators;
4) Provide technical exchanging;
5) Offer spare parts at a best price for long term.
Note: Responsible for handling other required matters conforming the state regulations.
Company profile
Henan Kuangyan Heavy machinery Co., Ltd. is specialized in heavy equipment like various crushers, magnetic separators, mining machines, bricks and blocks machines, cement production line, AAC block line, etc., which is located in the middle of China. Our competitive price, high quality products and excellent after-sales service had gain us good reputation in this field.
Our company is headquartered in Zhengzhou Country's High-tech Industrial Development Zone, which consists of three branches, a research and development department. Since the establishment of the company, always adopt advanced modern management system, and focused on innovation, has brought together a number of scientific and technological elite, the company employees is more than 500people now, with 20 senior engineers, and more than 100 midding technicians. The company has long-term cooperation with domestic scientific research units, has introduced advanced technology, technics and testing system at home and abroad.
