Specification
1,Advanced high rigid & minimal distortion toggle system, designed by 3D software and FEM analysis.
2,Toggle system and tie-bar adopt self-lubricating graphite copper bush, to ensure the machine clean and long life time.
3,Moving platen is supported by bearing to improve the platen parallelism and protect mould & tie-bar for sustainable usage.
4,High rigid machine body frame via 3D software design and FEM analysis spreads forces evenly, which reduce distortion and enhance machine duration in high-speed machine running.
5,High precision Rexroth variable pump with 21 Mpa system pressure, together with quick response Rexroth valves, to make injection more stable and effective.
6,The integrated double drive cylinder injection system with symmetrical oil circuit and linear guide, can control injection stable and precise. Weldless oil circuit can bear high pressure and high forces.
7,Advanced controller system with rate of reaction up to 1 ms, promotes the sensibility and stability of motion to ensure stable and perfect molding.
YH170-260 | |||
| INJECTION UNIT | |||
| Sxrew diameter mm | 45 | ||
| Screw stroke mm | 175 | ||
| Screw L:D L/D | 25 | ||
| Shot volume cm3 | 278 | ||
| shot weight Ps g | 250 | ||
| injection pressure Mpa | 150 | ||
| dwell pressure kgf/cm2 | 1532 | ||
| injection speed mm/sec | 300 | ||
| injection rate cm3/sec | 476.9 | ||
| screw rotate speed rpm | 450 | ||
| nozzle sealing force KN | 40.6 | ||
| nozzle advancestroke mm | 80 | ||
| heater power KW | 14.1 | ||
| CLAMPING UNIT | |||
| clamp force KN | 1700-2600 | ||
| toggle steoke mm | custom made | ||
| space between tie bars mm | 600×600 | ||
| max.mould height mm | custom made | ||
| min.mould height mm | custom made | ||
| ejector number pc | 5 | ||
| ejector force KN | 61.5 | ||
| ejector stroke mm | custom made | ||
| OTHERS | |||
| specialpump pressure Mpa | 23 | ||
| machine dimensions(L×W×H)m | |||
| Machine weight T | |||
| oil tank capacity L | 450 | ||
| pump motor power KW | 30 | ||
