preform injection moulding machine
1. Two state plasticizing enables plenty injection quantity;
2. Take out plate with three working position insures sufficient cooling time and shorter cycle time;
3. High quality parts and accessories from world famous brands enable higher speed and precision;
4. Special screw design increases torque while brings down shear force to avoid degradation;
5. Accumulator from world reputable manufacture increases performance while brings down power consumption;
| FL1100 | |||||
| INJECTION UNIT | |||||
| A | B | C | D | ||
| Screw dimeeter | mm | 100 | 110 | 120 | 130 |
| Screw L:D | L/D | 24.2 | 22 | 20.2 | 18.6 |
| Shot volume | cm3 | 4238.8 | 5129 | 6103.9 | 7163.6 |
| Injection pressure | Mpa | 210.5 | 174 | 146.2 | 124.6 |
| Screw rotate speed | rpm | 96 | |||
| Shot weight PS | g | 3856 | 4667 | 5553 | 6518 |
| Shot weight PS | oz | 136.052 | 164.624 | 195.947 | 229.951 |
| CLAMPING UNIT | |||||
| Clamp force | KN | 11000 | |||
| Toggle stroke | mm | 1220 | |||
| Space betweentie bars | mm | 1160×1160 | |||
| Max.mould height | mm | 1250 | |||
| Min. mould height | mm | 480 | |||
| Ejector stroke | mm | 350 | |||
| Ejector force | KN | 246 | |||
| Ejector number | pc | 20+1 | |||
| OTHERS | |||||
| Die positioning hole | mm | 250 | |||
| Pump pressure | Mpa | 16 | |||
| Pump motor pOwer | KW | 45+45 | |||
| Heating power | KW | 90 | |||
| Oil tank capacity | L | 1650 | |||
| Machine weight | T | 60 | |||
| Machine demensions(L×W×H) | m | 11.5×3.1×3.4 | |||
