Fujikura FSM-12S Fusion Splicer
Specifications
PARAMETER | VALUE |
Applicable Fibers | Single/SMF (G.652 & G.657), MMF (G.651), DS (G.653), NZDS (G.655) |
Cladding Dia./Sheethe Dia | 125um/160um to 3mm by fiber holder system |
Cleave length | 5mm to 13mm |
Fiber Cleave Length | 5 to 16 mm |
Splice mode/heating mode | Total 100 splice modes/30 heating modes |
Typical Average Splice Loss | 0.03 dB with SM, 0.02 dB with MM, 0.06 dB with DS, 0.06 dB with NZDS, measured by cut-back method relevant to ITU-T and IEC standards |
Splicing Time/Tube heating time | Typical 12 sec with SM/Typical 30 sec with FP-03(60mm)sleeve |
Return Loss | >60dB |
Splice result storage | Last 2,000 results |
Viewing methods/magnification | 2 axis CMOS camera with 4.47* color LED. 100X magnification X or Y, or both X and Y simultaneously |
Tension Test | 1.96 to 2.25N |
Heater | Built-in heater, 30 heating modes |
Application protection sleeve | 60mm, 40mm and Fujikura micro sleeves, insulated fiber sleeve |
No.of splicer/heating per battery full charge | Typical 100 cycles with BTR-10 |
Electrode life | >= 3000 splices |
Size/Weight | 121W*162D*57H mm/776g(with battery) |
Operating Condition | 0 to 3,660 m above sea level,Wind:15m/s, 0 to 95%RH and -10 to 50°C respectively |
Other Features | PC software upgrade/data management |
Resistance Features | Shock resistance:1750px(30inch) bottom surface drop Dust resistance:Exposure to dust(0.1 to 500um dia. Alumina Silicate) Rain Resistance:H=10mm/hr for 10 minutes |
Standard Package
Item | Description | Model No. | Qty |
1 | Fusion Splicer | FSM-12S(built-in battery) | 1pcs |
2 | AC adapter/battery charger | ADC-19 | 1pcs |
3 | AC power cord | ACC-08 | 1pcs |
4 | Spare Electrodes | ELCT2-12 | 1 pair |
5 | Cleaver | CT-06 | 1pcs |
8 | Quick reference guide | M-12S-C | 1pcs |
10 | Instruction Manual(CD) | M-12 | 1pcs |
11 | Alcohol Pot | AP-01 | 1pcs |
12 | Battery charge cord | DCC-18 | 1pcs |
13 | Carrying Case | CC-29 | 1pcs |
14 | Screw Driver | SC-01 | 1pcs |
