Application of Gold ore Flotation separator:
Flotation machine is widely used for roughing, concentrating and counter-flotation of nonferrous metal that includes copper, lead, zinc, nickel and molybdenum, ferrous metal and nonmetallic mineral.
Working principle Gold ore Flotation Separator:
(1) After intensively mixed, the pulp and medicaments are fed to the groove bottom of the first tank.
(2) When the impeller of the flotation machine begins to rotate, negative pressure is formed, making the air and pulps at the bottom and middle part of the tank enter the mixing zone. The pulp, air and medicaments are then mixed in the mixing zone.
3) As a result of the cenrifugal force, the blended pulps are lead to the mineralization area. The air is in full contact with the coal particle and forms mineralized discharged by the scraping tool. Finally, clean coal foam is produced by this flotation machine.
(4) Coal particles that are not mineralized will be remixed, re-mineralized and re-separate through the recycle hole and the upper intake.
(5) The left pulp that are not sucked by the impeller enters intor the third tank after going through the process of the first tank, thus, flotation machine runs in cycle and discharges ore pulp through the tailing box of the flotation machine.
Advantages of SF Flotation Separator:
1. high inhalation, low power.
2. Each chute can inhale gas, sink magma, separate.
3.There is no need of accessory equipments horizontal equipment.
4.It is easy to change the flow chart.
5.The cycling way of magma is very reasonable.
6.It can reduce the impurities to a great extent.
7.There is automatic equipment on the magma surface. It is easy to adjust.
8. The upward one makes the magma cycle toward upward, which the downward one makes the magma cycle downward.
9.It increase concentrate grade by 4-6%.
10. It increase cycling rate by 8%.
11.It increase production by 12%.
Flotation cell machine is applicable for separating non-ferrous metal, black metal, noble metal, non-metal mineral, raw body and materials of chemical industry, which are subject to coarse separation, swept separation, fine separation and floatation, so the useful ore are reclaimed. As in copper, lead, zinc, nickel and molybdenum, ferrous metal and nonmetallic mineral.
Flotation separator is used for separating ferrous and non-ferrous metals. It can be also used for separation of non-metaI materials such as coaI fluorite and steatite.The impelIer rotates by triangIe belt of the motor,whih produces centrifugal function and causes negative pressure. 0n one hand it draws in enough air mixed with ore magma; on the other hand it agitates to mix ore magma with chemicaI medicines.At the same time,it minifies bubbles so that minerals can stick above them.float on the su- rface of magma,and form mineralized bubbles.The height of plate can be adjusted to control fluid Ievel so that the avaIlable bubbles can be scrapped out by scrapers.
Main technical parameters of SF series of flotation machine
Model | Effective volume(m3) | Processing ability (m3/min) | Motor power(kw) | Spindle speed(r/min) | Scraper speed(r/min) | Scraper Power(kw) | Trough Size(mm) | Single Slot weight(kg) |
SF0.37 | 0.37 | 0.2-0.4 | 1.5 | 352 | 25 | 1.1 | 700*700*750 | 468 |
SF0.7 | 0.7 | 0.3-0.9 | 3 | 400 | 25 | 1.1 | 900*820*950 | 600 |
SF1.2 | 1.2 | 0.6-1.6 | 5.5 | 330 | 25 | 1.1 | 1100*1100*1100 | 1873 |
SF2.8 | 2.8 | 1.5-3.5 | 11 | 268 | 25 | 1.1 | 1750*1600*1150 | 2538 |
SF4 | 4 | 2.0-4.0 | 15 | 220 | 25 | 1.5 | 1850*2050*1200 | 2838 |
SF8 | 8 | 4.0-8.0 | 30 | 191 | 25 | 1.5 | 2200*2900*1400 | 4129 |
SF10 | 10 | 5.0-10 | 30 | 191 | 25 | 1.5 | 2200*2900*1700 | 4486 |
SF20 | 20 | 5.0-20 | 30*2 | 191 | 25 | 1.5*2 | 2850*3800*2000 | 9828 |
XJK series of flotation machine
Type | Effective volume(m³) | Diameter of impellor(mm) | Capacity(m³/min) | Speed of impellor(r/min) | Motor of impellor | Weight (t/single trough) |
XJK-0.35 | 0.35 | 300 | 0.18-0.4 | 470 | Y90L-4-1.5 | 0.43 |
XJK-0.62 | 0.62 | 350 | 0.3-0.9 | 400 | Y100L-4-3 | 0.86 |
XJK-1.1 | 1.1 | 500 | 0.6-1.6 | 330 | Y100M-4-5.5 | 1.38 |
XJK-2.8 | 2.8 | 600 | 1.5-3.5 | 280 | Y100M-4-11 | 2.33 |
XJK-5.8 | 1.1 | 750 | 3-7 | 240 | Y100M-4-22 | 3.533 |
About Us:
Henan Zhongke Engineering & Technology Co., Ltd. is specialized in heavy equipment like various crushers, magnetic separators, mining machines, bricks and blocks machines, cement production line, AAC block line, etc., which is located in the middle of China. Our competitive price, high quality products and excellent after-sales service had gain us good reputation in this field.
Our company is headquartered in Zhengzhou Country's High-tech Industrial Development Zone, which consists of three branches, a research and development department. Since the establishment of the company, always adopt advanced modern management system, and focused on innovation, has brought together a number of scientific and technological elite, the company employees is more than 500people now, with 20 senior engineers, and more than 100 midding technicians. The company has long-term cooperation with domestic scientific research units, has introduced advanced technology, technics and testing system at home and abroad.
Our service:
1. Pre-sales services:
1) Select proper equipment model;
2) Design and manufacture products according to clients' special requirement;
3) Arrange for visiting our factory, assist them to handle relative procedure, such as visa.
2. Services during the sale:
1) Make sure goods prepared within delivery time;
2) Pre-check and accept products ahead of delivery;
3) Prepare documents required to help customer pass customs clearance;
4) Help clients to make Project evaluation and feasibility analysis and draft solving plans.
3. After-sales services:
1) Assist clients to prepare for the first construction scheme;
2) Install, debug and examine the equipment;
3) Train technical personnel the first-line operators;
4) Provide technical exchanging;
5) Offer spare parts at a best price for long term.
Note: Responsible for handling other required matters conforming the state regulations
