10 amp 12 volt Solar Panel Charge Controller with PWM Charging Mode for Solar System
Quick Detail:
10A 12V PWM Solar Panel Charge Controller
LED indication
USB port (Current:1A)
Multi-functional protection
Size:130 mm*75 mm*35 mm
Specification:
|
Model |
PWM1012 |
|
Rated charging current |
10A |
|
Rated load current |
10A |
|
System Voltage |
12V |
|
Overload & short circuit protection |
1.25 times than rate current, protect the load within 60 seconds, 1.5times than rated current, protect the load within 5 seconds. 2.5times or over, starting the short circuit protection. |
|
no load loss |
≤12 mA (not including USB) |
|
charging (Discharging) circuit voltage drop |
<0.2V |
|
Discharging circuit voltage drop |
<0.15V |
|
Environmental temperature |
-20°C -- +50°C |
|
Hoisting voltage |
14.4V(lasting time:10min) |
|
Float charging voltage |
13.7V |
|
Temperature compensation |
-4mv/cell/°C(hoisting, floating charging compensation) |
|
Low voltage protection |
10.7V |
|
Low voltage reconnecting |
12.6V |
|
Charging mode |
PWM |
|
installing holes |
Φ3.5—55mm*122mm |
|
installing cables diameter |
≤16mm² |
Solar charge controller forms an essential component of virtually all solar power systems that utilize batteries. The charge controller is used to regulate the current flowing from the solar panels to the batteries. These solar controllers prevent the battery from the damages caused by overcharge and disconnect the battery in case of severe discharge by shutting of loads. Easy Photovoltech's solar charge controllers are specially designed to improve the battery performance and increase the life.
Key Features :
- A energy efficient controller for rural/urban solar charging system
- Low Power Load Controller and PWM solar charger in a single Unit
- Perfect solution for urban and rural requirements
- Keeps battery healthy for longer period
- Optimum utilization of Solar Power
- Optional Dawn/Dusk Operation with Timer
- Provision for Temperature Compensation
- Low PV to Battery Drop
- Easy Installation
- Simple Handling
Function:
1. Intuitionist LED indicators show the current system battery capacity, charging and discharging state of the battery.
2. Having the protection functions as overcharging, over discharging, overload, short-circuit and reversed connection. &nb
