4000 LPH Anthracite Sand Filter Tank SS Screen Strainer For Suspended Particles

Claw Shape SS Screen Strainer 4,000 LPH Anthracite Filter Tank For Suspended Particles
 
 Features:

Anthracite filter is especially selected minerals from the deep well, with the highest percentage of carbon. Anthracite filter using artificial classification, can reduce extraneous minerals and lower ash content. By filtering and washing. Anthracite filter is especially selected minerals from the deep well, with the highest percentage of carbon. Water filter using artificial classification, can reduce extraneous minerals and lower ash content. Water filter through the filtering and washing, ensure the suitable water filtration with. The ability to maintain a good solid particles, so the anthracite can reliably improve the ability to remove suspended particles. In addition, its low coefficient of uniformity, to help speed up the flow.

Effect of quality anthracite filter media plays in the filtering process, directly affect the filtration of water, so the choice of this filter must meet the following requirements:

High mechanical strength, breakage and wear rate and should not be greater than 3% (percentage by weight).

The chemical properties of stability, no toxic substances. In general acidic, alkaline, neutral water insoluble. Products manufactured by the China water treatment media supervision and test center measured: hydrochloric acid soluble rate is 0.68% (ministerial standard is 3.5) can achieve good purifying effect in all kinds of water.

The particle size distribution is reasonable, specific surface area. The appearance of the product is spherical and angular, good gloss, mechanical vibration three times screening, grading conform to the relevant technical indexes. Uniformity coefficient (K60) of not more than 1.5 (Japan), uniformity coefficient (K80) between 1.6-2.0, void ratio greater than 50%.

The range of particle size is smaller than the minimum size specified by weight not more than 5%, greater than the specified maximum size not larger than 5% by weight.

Specifications:
 

Send message to this supplier

TPYE	TANK SIZE (mm)	TOTAL HIGH (mm)	FLOW RATE (m3/hr)	INLET AND OUTLET (mm)	ACTIVATED CARBON (t)
YLD500	500*1500	2350	~2	DN32	0.11
YLD 600	600*1500	2380	2-3	DN32	0.16
YLD 700	700*1500	2400	~4	DN40	0.22
YLD 800	800*1500	2400	~5	DN40	0.3
YLD 900	900*1500	2500	~6	DN50	0.36
YLD 1000	1000*1500	2600	~8	DN50	0.45
YLD 1200	1200*1500	2700	~11	DN65	0.65
YLD 1400	1400*1500

Mr. Mint Tel: 86-25-86653369
	Enter between 20 to 3,000 chatacters.

Contact Method

Jiangsu YLD Water Processing Equipment CO.,LTD

3388 Zhengcheng Road Huangtu Town Jiangyin City, Nanjing, Jiangsu, China (Mainland)