Portable Round Downspout Roll Forming Machine For Aluminium Pipe
1. Frame construction
The frame construction is a weldment of structural steel welded into a rigid frame. The frame is machined to provide a true plane for the assembly of the forming stations.
Adjustable feet are provided enabling the machine to be set level to within .005 of an inch. This insures the proper working and long life of the precision workmanship built into the machine.
2. Forming stations
All the forming rolls coming into contact with the painted surface of the conductor pipe are hard chrome plated to insure long roll life and protect the finish on the pipe.
3. Cutting method
We recommend manual cut-off methods. It makes a quick, clean cut that is burr-free, and without the flying chips that come from saw cuts.
4. Safe
The exit shear makes a lot less noise than a regular saw.
It is totally enclosed and the operator cannot get cut with the exit shear.
5. Main introduction
|
No. |
Item |
Specifications |
|
1 |
Pipe size (one machine for one size only) |
Rectangular: 2*3 inch, 3*3 inch, 3*4 inch Round: 3 inch or 4 inch Customized size |
|
2 |
Forming speed |
Standard: 6m/min |
|
3 |
Material thickness |
Aluminum only: 0.4-0.6mm |
|
4 |
Coil spools |
One 381mm I.D. spool included |
|
5 |
Electrical system |
110 volt or 220 volt ON/ OFF switch Forward/ Reverse switch Entrance JOG button |
|
6 |
Model |
Semi-automated: length control with limit switch |
|
7 |
Driven system |
Urethane top and bottom drive rollers for smooth even Non-twisting drive |
|
8 |
Machine size |
Length: 3680mm plus cutoff saw Width: 380mm Height: 1065mm |
|
9 |
Cutoff |
Flying saw cutoff |
