Metal PU Sandwich Panel Production Line Steel Floor Decking Forming Machine
1. Components of line
|
Name |
Model/Name |
Q’ty |
Technical description |
|
Decoiler system |
5 T manual decoiler |
1 set |
Umbrella type, manual tensing, bearing weight 5 tons |
|
Main Forming system |
Guiding device |
1set |
Roller 45 steel with treatment, designed by professional software, accuracy. Torri assembling type, long life and better look. Entire chain driven system to ensure the roller movement. Cutting blade Cr12 with frequency |
|
Roll forming system |
1 set |
||
|
Hydraulic cutting device |
1set |
||
|
Run out table |
1.5M support table |
Support the final production, roller design to make sure the panel without any scratch |
|
|
Hydraulic system |
1 set |
Supply the power for cutting system |
|
|
Electranic control system(PLC) |
1 set |
PLC control, fully automatically, cut to length. Button operation, big touch screen. AC frequency to adjust speed |
|
2. Technical specifications
Decoiler
Decoiler: umbrella type, passive feeding, manual tensing
Bearing weight: 5Tons
Main forming machine
Suitable material: 0.8-1.2mm, yield strength≤G250Mpa
Voltage: 220V, 60HZ, 3 phases
Decoiler: passive feeding, manually tense
Decoiler bearing: 5T
Main motor power: 2X22KW=44KW
Forming stations: 36 stands
Main shaft diameter: φ85mm
Hydraulic station motor power: 5.5KW
Shear material: Cr12with quenching
Coil width: 1250mm, Cut to length: 10m±2mm
Roller material: NO.45 steel with hard chrome plating
Forming speed: 12-15m/min
Shear material: Cr12with quenching
Profile measure up to Chinese GBT/12755-91 standard
Hydraulic station oil pump, gear pump CB-E314
PLC control system
Computer adopt PLC control system, Mitsubishi FX-IS series
Computer operating board: Xinjie OP320A
Frequency: American Danfoss
Function and operation: Control the starting, operation and stopping of the complete line, including distribution section, operation table, counting instrument. Use PLC to control, set and adjust the length. Both man-made and auto operations: on the man-made condition, each equipment can operated by switch; on the auto condition, only circulating stop and rapid stop switch.
Hydraulic system
Motor power of hydraulic station: 5.5KW
Function: apply power for cutting machine
|
Floor Decking Roll Forming Machine
Steel coilInput area |
 |
