SPECIFICATIONS
1. DC Power Supplies Module
Fixed Output: +5V/1A, -5V/0.5A, +12V/0.5A, -12V/0.5A
Variable Output: +0V ~ +23V/0.5A, -0V ~ -23V/0.5A
2. AC Power Supplies Module
19V–15V–9V–0V–9V–15V-19V
3. Function Generator Modules
Sine, Triangle and Square waveform output
Frequency range: 1Hz to 1MHz in 6 decades
With fine adjust, Amplitude and DC offset control
TTL Mode: 1Hz to 1MHz in 6 decades
Six frequency ranges:
1Hz to 10Hz
10Hz to 100Hz
100Hz to 1KHz
1KHz to 10KHz
10KHz to 100KHz
100KHz to 500KHz
Sine wave output: 0 to 12V peak to peak variable
Triangle wave output: 0 to 8V peak to peak variable
Square wave output: 0 to 22V peak to peak variable
4. Removable Solderless Breadboard Module
Interconnected nickel plated with a total of 2200 tie points nickel plated contact, fitted all DIP sizes and all components with lead and solid wire in diameter of AWG #22-30 (0.3-0.8mm)
5. Two Logic Output Switches Module
Provide two sets of logical output &
6. Two Pulse Switches Module
Provide two sets of pulse output &
2 units push button switch contain switches debouncer for eliminating the bounce caused by switch from "open" to "close" or from "close" to "open" position.
7. 16-Bits LED Indicators with buffer Module
Sixteen LED's separate input terminals in three colors. (RED, Yellow & Green). The LED will be lighted up when input is at "HI Level", and it will be turned off when it is at no input or at "LO Level". Capable for Traffic Light Experiments.
8. 16-Bits HI/LO Data Output Switches Module
16 units slide switches and corresponding output terminals. When switch is set at "down" position, the output is LO level; contrarily, it is to be HI level when setting at "up" position.
9. TTL/CMOS Selection Switch
Select TTL or CMOS Mode for data switches
11. Speaker Module
8Ohm, 0.25W With Buffer
14. Potentiometer Module
With 1K, 100K and 500K Ohm Potentiometers
13. Adaptors Module
2 Channels 4mm Banana and 2 Channels BNC Adaptor
The ADT-7000 is shipped with a comprehensive CD Format Experiments Manual, Instruction Manual with Self Maintenance Guide and a power cord.
Power Supply : 240VAC, 50Hz (Fused Protected)
Dimensions : (W x D x H) 380 x 280 x 90mm
Weight : 3.5 kgs
