Pinch Type Pipe Welding Rotator Welding Oscillator With Down Press Device
1. Summarize
That automatic welding machine including: manipulator, welding rotator, and electric system etc, mainly used to weld the butt welding seam which formed from the pipe, pipe elbow, pipe flange, perpendicular tee pipe. The welding head will be relatively fixed, while the piping spool piece revolving at a specific rate, and the high efficient and low cost shielded welding or SAW process is adopted, so it has the features of easy-operation, reliable-performance and wide-application field, and which enhancing productivity, increasing the extent of automatic, reducing welder’s working intensity and adapting to piping workshop prefabrication.
2. Specifications
|
Model |
PP2 |
|
Max loading capacity |
2000Kg |
|
Applied work piece dia./mm |
Φ70-Φ820mm |
|
Rotation speed |
100-1000mm/min |
|
Rotate torque |
1000Nm |
|
Tilt torque |
5000Nm |
|
Tilt degree |
±45° |
|
Tilt center height |
910mm |
|
Speed adjustment |
AC Inverter |
|
Pendant cable length |
5m |
|
Power |
2.4KW |
|
Weight |
1600Kg |
|
Dimension(L×W×H) |
2030*920*2630mm |
|
Pinch roller |
Diameter: 120mm |
|
Width: 200mm |
|
|
Cross slide |
Motor: 25W |
|
Stroke: 150mm |
|
|
Oscillator |
Oscillator angle: 8 degree |
|
Center moving: 8 degress |
|
|
Waving dewall time: 0-2s |
3. Structure characteristics
Pinch type precise welding rotator consists of column, lifting slide unit, rotation roller, the column fixed on the bottom bracket, through turn round organization can turn ± 90° by manual, at the front of lifting slide along fixed a set of assistance compress tightly organization, easy to compress tightly the work piece in weld the process, lend support to the pressure is 450kg, on the side column has a horizontal beam for reserving to install welding control organization.
Turn roller is divided into powered part and idle part, powered part with column fixed on the bottom bracket, the reducer is a kind of special model which adopt to apply to pipe prefabrication product, can adapt the pipe diameter reach Ø50-600mm, its motor power is 0.75kw, electric voltage is three phase 240V, 60Hz. The idle part doesn't equip motor, mainly prop up the work piece, another the speed is adjust by AC INVERTER to realize step-less speed adjustment with digital display that the customer can preset parameters.
The electricity of this set equipments control the system orientation communicate three phase 380V, 50Hz of power supply request, Roller top end leaves ground to be apart from for the 650mm, the customer can increment or decrease mat piece according to the size of the work piece during welding.
 |
 |
| Long pipe flange welding rotator/ positioner, with down press device |
Pinch type welding rotator with oscillator If you want to see the video please search Luk Mankai on youtube |
