6-10 m/min Speed Cold Rolling Forming Machine with PLC Controlling System
Technical parameters
1. Matching material: stainless steel
2. Material thickness range:1.5-2.5mm
3. Main motor power: 45 KW
4. Forming speed: 6-10 m/min (include punching and cutting time)
5. Quantity of stands: about 24 stands
6. Shaft Material and diameter: 85mm, material is 40CR
8. Material Of The Stations: pig iron
9. Tolerance: 3m+-1.5mm
10. Way Of Drive: Gear box
11. Controlling system: PLC
12. Total weight: about 25 Tons
13. Voltage: 380V/ 3phase/ 50 Hz
14. Size of the machine: L*W*H 13m*1.5m*1.2m
15. Material of forming rollers: CR12(better material than GCR15), coated with chromed treatment
16. Spacer treatment:plating
17. The tolerance: 1. the length will be +- 1mm
2. the holes distance will be +-0.5mm
Cutting and the control cabinet
Cutting:
(1) Cutting motion: The main machine won’t stop while the saw cutting. The saw will have lead rail, it will tracking the material, the length will control by PLC. Comes the right length, it will cut while moving forward, After the cutting, the saw will send back where it started, and ready for next loop
(2) Drive motor of the saw: 15KW
(3) Length measuring: Automatic length measuring
(4) Tolerance of length: +/- 1.5mm
Control Box: Siemens
(1) Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase (this is can depend on customer request)
(2) Automatic length measurement:
(3) Automatic quantity measurement
(4) Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved
(5) Length inaccuracy can be amended easily
(6). Control panel: Button-type switch and touch screen
(7) Unit of length: millimeter (switched on the control panel)
Main composition of the machine
The machinery line consists of 3.5 tons hydraulic de-coiler , leveling , material guiding, servo feeding, press punching, roll forming system, fly saw cutting system ,run-out table, control cabinet with PLC
Working Flow
hydraulic De-coiling —electrical leveling—servo feeding—press punching—material guiding—roll forming—length sizing—fly saw cutting—receiving platform— Finish
3.5 Tons hydraulic un-coiler
Seven rollers leveling machine
Servo feeding machine
