AV31101A Microwave Components calibration kit
General Description:
The AV31101A type N 50Ω male calibration kit is a kind of instrument calibration kit, which can satisfy all demands except measure laboratory. It can be used to calibrate vector network analyser with type N female port. The calibration kit includes male open, male short, male load.
Specifications:(Temperature: 23±3)
| Parts |
Frequency range |
Parameter |
Specification |
|
Male open |
DC-18GHz |
Deviation from Nominal Phase |
±1.5° |
|
Male short |
DC-18GHz |
Deviation from Nominal Phase |
±1.0° |
|
Male load |
DC-18GHz |
VSWR |
<1.055 |
Ordering Information:
AV31101A |
Type N 50ΩMale Calibration Kit |
Notes:
1. WHEN USING, PLEASE ADOPT ELECTROSTATIC SENSITIVE DEFENSE STEP.
2. BEFORE USEING, INSPECT THE CONNECTOR TO MAKE SURE NO PARTICLES OR RESIDUE ARE PRESENT; PLEASE INSURE PIN DEPTH OF DEVICES CONNECTED TO BE UP TO THE STANDARD.
3. WHEN USING, DO NOT TURN THE DEVICE BODY. ONLY TURN THE CONNECTOR NUT. DAMAGE TO THE CENTER CONDUCTOR CAN OCCUR IF THE DEVICE BODY IS TWISTED.
4. USING A TORQUE WRENCHGUARANTEES THAT THE CONNECTION IS NOT TOO TIGHT, PREVENTING POSSIBLE CONNECTOR DAMAGE.
5. WHEN NOT IN USE, PLEASE INSTALL THE PROTECTIVE END CAPS AND STORE THE CALIBRATION DEVICES IN THE FOAM-LINED STORAGE CASE.
6. PLEASE VERIFY THE PERFORMANCE OF YOUR CALIBRATION KIT IN A PERIOD OF TIME BY THE QUALIFIED.
7. PRODUCT SPECIFICATIONS AND DESCRIPTIONS IN THIS DOCUMENT ARE SUBJECT TO CHANGE WITHOUT NOTICE.
