Application
The machine is mainly for extruding soft and hard polyvinyl chloride, polyethylene and other thermoplastics only use it with the corresponding auxiliary equipment (including molding head) to produce several kinds of plastic products, such as films, tubes, rods, plates , thread, cable insulation , etc., it can also be used for granulation.
Machine Feature
The machine has advantages of advanced design, high output, good plasticization, low energy consumption, involute gear with low noise, smooth operation, large capacity, long life and other characteristics.
Parameters
Model | Screw diameter | Draw ratio | Power | Output torque | Screw rotating speed | Capacity |
SJ25/25 | 25 | 25:1 | 1.5 | 175 | 100 | 3.4 |
SJ30/25 | 30 | 25:1 | 5.5 | 410 | 125 | 12.5 |
SJ45/25 | 45 | 25:1 | 7.5 | 580 | 100 | 20 |
SJ45/30A | 45 | 30:1 | 15 | 1000 | 145 | 40 |
SJ45/30C | 45 | 30:1 | 30 | 1600 | 185 | 10 |
SJ65/25 | 65 | 25:1 | 22 | 1500 | 100 | 60 |
SJ65/30 | 65 | 30:1 | 30 | 3600 | 105 | 80 |
SJ65/33 | 65 | 33:1 | 45 | 4800 | 120 | 120 |
SJ75/33 | 75 | 33:1 | 90 | 7200 | 120 | 350 |
SJ90/25 | 90 | 25:1 | 55 | 4400 | 120 | 150 |
SJ90/30 | 90 | 30:1 | 90 | 9200 | 94 | 250 |
SJ90/33 | 90 | 33:1 | 160 | 13000 | 120 | 500 |
SJ120/25 | 120 | 25:1 | 90 | 9200 | 94 | 350 |
SJ120/30 | 120 | 30:1 | 110 | 16000 | 94 | 350 |
SJ120/33 | 120 | 33:1 | 250 | 25000 | 94 | 800 |
SJ150/25 | 150 | 25:1 | 110 | 35000 | 40 | 320 |
SJ150/30 | 150 | 30:1 | 132 | 36000 | 50 | 350 |
SJ150/34 | 150 | 34:1 | 315 | 32000 | 75 | 1100 |
SJ200/25 | 200 | 25:1 | 160 | 50000 | 30 | 500 |
SJ200/30 | 200 | 30:1 | 200 | 60000 | 40 | 550 |
SJ200/34 | 200 | 34:1 | 400 | 55000 | 75 | 1500 |
