JW159S Type Profile Bending Machine With 4.5m/min Rolling Speed
1. Specifications:
|
Main technical parameter |
JW-159S | |
| Max section modulud of elasticity(cm3) | 100 | |
| Profile yield limit | ss£245MPa | |
| angle iron incurvature | Max section | 110×110×14 |
| Min bending dia. | 1600 | |
| Min section | 40×40×4 | |
| Min bending dia. | 800 | |
| angle iron excurvature | Max section | 120×120×16 |
| Min bending dia. | 1600 | |
| Min section | 40×40×4 | |
| Min bending dia. | 600 | |
| Channel steel excurvature | model | 22 |
| Min bending dia. | 1400 | |
| Channel iron incurvature | model | 22 |
| Min bending dia. | 1500 | |
| Flat iron bend in hard way | Max section | 120×40 |
| Min bending dia. | 1200 | |
| Flat iron bend in easy way | Max section | 250×40 |
| Min bending dia. | 1200 | |
| Round steel | Max section | 90 |
| Min bending dia. | 1000 | |
| Pipe | Max section | 159×5 |
| Min bending dia. | 1600 | |
 Diameter of standard module (mm) |
460 | |
| Rolling speed(m/min) | 4.5 | |
| Main motor power(KW) | 15 | |
2. Description:
This machine is our new kind of bending equipment which composed of main body, down roller, supporting roller, mould, transmisssion part, NC digital display, electrical system and hydraulic system. By changing different module, this machine can bend various kind of steel profile such as angle iron, channel steel, flat iron, round steel, pipe etc. It is widely used in oil industry, chemical industry, hydropower, shipbuilding industry and machinery manufacture industry.
3. Features
a. Uses the microcomputer control, automatic bending;
b. Safety: the emergency stop button on the bending arm;
c. Dialogue operation, easy to study and understand;
d. High pipe-bending precision up to ±0.15°;
e. 1000 groups pipe-bending information storage, all angles work forms a coherent whole;
f. The mandrel automatically in and out, saving much time;
g. Suitable for bending steel pipe, stainless steel pipe, copper pipe, aluminum pipe, etc;
h. Can install auxiliary push die, low returning-core function, can bend thin pipes;
i. Special fitting: special mold, anti-wrinkle board, auxiliary push installation, etc.
4. Main supplier
a. Mould: material is 42CrMo, supplier is Nantong dongfang, Jiangyin zhenhong.
b. Bearing: pherical roller bearings, supplier is LYC, ZWZ, NXZ.
c. Hydraulic motor: supplier is Ningbo yonglian
d. Contactor and air switch: supplier is Zhejiang zhengtai.
e. Dispaly: supplier is Wuxi ruipu.
f. Photoelectric coder: supplier is Wuxi ruipu
