5mm round pure green color Indicator LED in 9.Back lighting outdoor advertising Circuit board
- Features:
- Choice of various color.
- Available on tape and reel.
- Reliable and robust.
- The product itself will remain within RoHS compliant Version.
- Descriptions:
- The series is specially designed for applications requiring higher brightness.
- The LED lamps are available with different colors, intensities.
- Applications:
- TV set.
- Monitor.
- Telephone.
- Computer.
- Circuit board.
- Status indicators.
- Commercial use.
- Advertising Signs.
- Back lighting.
Part No. | Chip Material | Lens Color | Source Color |
DL-504PGCA-1PG20 | GaAlAs | GREEN | Pure Green |
- Package Dimension:
Notes:
- All dimensions are in millimeters (inches).
- Tolerance is ± 0.25 mm (.010″) unless otherwise noted.
- Protruded resin under flange is 1.00 mm (.039″) max.
- Specifications are subject to change without notice.
- Absolute Maximum Ratings at Ta=25
-
Parameters Symbol Max. Unit Power Dissipation PD 120 mW Peak Forward Current
(1/10 Duty Cycle, 0.1ms Pulse Width)
IFP 100 mA Forward Current IF 30 mA Reverse Voltage VR 5 V Operating Temperature Range Topr -40 to +85 Storage Temperature Range Tstg -40 to +100 Lead Soldering Temperature
[4mm (.157″) From Body]
Tsld 260 for 5 Seconds Electrical Optical Characteristics at Ta=25
Parameters Symbol Min. Typ. Max. Unit Test Condition Luminous Intensity * IV 14000 23000 --- mcd IF=20mA (Note 1) Viewing Angle * 2θ1/2 --- 20 --- Deg IF=20mA (Note 2) Peak Emission Wavelength λp --- 518 --- nm IF=20mA Dominant Wavelength λd --- 523 --- nm IF=20mA (Note 3) Spectrum Radiation Bandwidth Δλ --- 35 --- nm IF=20mA Forward Voltage VF 3.0 3.3 4.0 V IF=20mA Reverse Current IR --- --- 10 µA VR=5V Notes:
- Luminous Intensity Measurement allowance is ± 10%.
- θ1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
- The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device.
- Typical Electrical / Optical Characteristics Curves
(25 Ambient Temperature Unless Otherwise Noted)
- Reliability Test Items And Conditions:
The reliability of products shall be satisfied with items listed below:
Confidence level: 90%. LTPD: 10%.
1) Test Items and Results:
Test Item | Standard Test Method | Test Conditions | Note | Number of Damaged |
Resistance to Soldering Heat |
JEITA ED-4701 300 302 |
Tsld=260±5, 10sec 3mm from the base of the epoxy bulb | 1 time | 0/100 |
Solder ability |
JEITA ED-4701 300 303 |
Tsld=235±5, 5sec(using flux) |
1time over 95% |
0/100 |
Thermal Shock |
JEITA ED-4701 300 307 |
0~100 15sec, 15sec | 100 cycles | 0/100 |
Temperature Cycle |
JEITA ED-4701 100 105 |
-40~25~100~25 30min,5min,30min,5min | 100 cycles | 0/100 |
Moisture Resistance Cycle |
JEITA ED-4701 200 203 |
25~65~-10 90%RH 24hrs/1cycle | 10 cycles |
Didn't find what you're looking for?
Post Buying Lead or
contact our customer service specialist for help!
|