• Deterrent Surveillance
• Integral Multiprotocol Receiver/Driver
• Digital Position and Zoom Control and Feedback Using Pelco D Protocol
• Integral Camera Enclosure
• Operational in 90 mph Winds, Can Withstand Wind Velocity up to
130 mph
• Pan Preset Speed of 160°/Sec in 50 mph Winds and 80°/Sec in 90 mph
Winds
• Variable Scan Speeds (1 to 160°/Sec)
• Translator Boards for Selected Competitive Protocols
• Easy to Install: Quick and simple electrical connections
• 24 VAC Power supply
• Full Continuous-Duty Warranty
SOFTWARE/HARDWARE
• 128 Programmable Presets with Labels
• Auto, Frame, and Random Scan
• Programmable Park
• Programmable Manual Limit Stops (Pan)
• Programmable Scan Limit Stops (Pan)
• Patterns
• Proportional Pan/Tilt
• 8-Inch Integrated Enclosure with Pre-Assembled, IOP Camera
• Sun Shroud, Heater/Window Defroster, and Insulation All Standard
• 1 Auxiliary Output (for IR)
• Integrated Window Wiper with Programmable Delay and Shut-Off
• 128 Programmable Presets with Labels
• Auto, Frame, and Random Scan
• Programmable Park
• Programmable Manual Limit Stops (Pan)
• Programmable Scan Limit Stops (Pan)
• Patterns
• Proportional Pan/Tilt
• 8-Inch Integrated Enclosure with Pre-Assembled, IOP Camera
• Sun Shroud, Heater/Window Defroster, and Insulation All Standard
• 1 Auxiliary Output (for IR)
• Integrated Window Wiper with Programmable Delay and Shut-Off
MECHANICAL
Pan Movement 360° Continuous pan rotation
Vertical Tilt Unobstructed +33° to –83°
Variable Pan/Tilt Speed
Pan 0.1° to 160°/sec variable-speed operation,
240°/sec Turbo
Tilt 0.1° to 60°/sec variable-speed operation
Preset Speeds
Pan 240°/sec
Tilt 60°/sec
Camera Mounting Integrated camera sled assembly
Pan Movement 360° Continuous pan rotation
Vertical Tilt Unobstructed +33° to –83°
Variable Pan/Tilt Speed
Pan 0.1° to 160°/sec variable-speed operation,
240°/sec Turbo
Tilt 0.1° to 60°/sec variable-speed operation
Preset Speeds
Pan 240°/sec
Tilt 60°/sec
Camera Mounting Integrated camera sled assembly
GENERAL
Construction Die-cast, extruded and sheet aluminum;
stainless steel hardware
Finish
Gray polyester powder coat
Viewing Window 0.23" (5.84 mm) thick, optically clear impact/
scratch-resistant coated Lexan®
Operating Temperature –50° to 122°F (–45° to 50°C) for sustained
system operation or 140°F (60°C) absolute
maximum. Within two hours after power-up,
the entire unit can de-ice and be operational
from a temperature of –13°F (–25°C).
Operating Environment Will remain operational in 90 mph wind
conditions; withstands 130 mph
Weight (without mount) Unit
Standard without IR 5.8kg
Standard with IR 6.5kg
Shipping
Standard with power 8.0kg
IR Standard with power 8.5kg
Package Size 41*43*22 cm
Construction Die-cast, extruded and sheet aluminum;
stainless steel hardware
Finish
Gray polyester powder coat
Viewing Window 0.23" (5.84 mm) thick, optically clear impact/
scratch-resistant coated Lexan®
Operating Temperature –50° to 122°F (–45° to 50°C) for sustained
system operation or 140°F (60°C) absolute
maximum. Within two hours after power-up,
the entire unit can de-ice and be operational
from a temperature of –13°F (–25°C).
Operating Environment Will remain operational in 90 mph wind
conditions; withstands 130 mph
Weight (without mount) Unit
Standard without IR 5.8kg
Standard with IR 6.5kg
Shipping
Standard with power 8.0kg
IR Standard with power 8.5kg
Package Size 41*43*22 cm
ELECTRICAL
Input Voltage 24 VAC, 50/60 Hz; Input Voltage Range ±10%
Power Consumption Maximum 70 VA per system(IR turn on)
Heater and Defroster Thermostatically controlled
Electrical Connections 2 power source connections made at mount location with wire splices and 1 ground wire splice; 1 BNC receptacle and 2 wire splices at mount location for Pelco D and Pelco P protocols;
2 wire splices for open collector auxiliary output
Aux 2 Open collector output with 2-second activation; connected relay must require no more than 32 VDC and 40 mA to energize relay coil; wire length between Esprit and relay must be less than 100 ft (30 m)
Input Voltage 24 VAC, 50/60 Hz; Input Voltage Range ±10%
Power Consumption Maximum 70 VA per system(IR turn on)
Heater and Defroster Thermostatically controlled
Electrical Connections 2 power source connections made at mount location with wire splices and 1 ground wire splice; 1 BNC receptacle and 2 wire splices at mount location for Pelco D and Pelco P protocols;
2 wire splices for open collector auxiliary output
Aux 2 Open collector output with 2-second activation; connected relay must require no more than 32 VDC and 40 mA to energize relay coil; wire length between Esprit and relay must be less than 100 ft (30 m)
Video Coaxial Cable
Max. Wiring Distances Cable Type* Maximum Distance
RG59/U 750 ft (229 m) RG6/U 1,000 ft (305 m) RG11/U 1,500 ft (457 m)
Max. Wiring Distances Cable Type* Maximum Distance
RG59/U 750 ft (229 m) RG6/U 1,000 ft (305 m) RG11/U 1,500 ft (457 m)
Minimum cable requirements:
75-ohms impedance; all-copper center conductor; all copper braided shield with 95% braid coverage
75-ohms impedance; all-copper center conductor; all copper braided shield with 95% braid coverage
