DLX-DVOPC Optical Convergence type Fiber Optic Transmitter and Receiver using passive optical components, converge optical signals to one fiber by wavelength-division. it can transmit 16channels optical signals at most, and the bandwidth of each optical signal is 2.5GHz Max. Optical Convergence type Fiber Optic Transmitter and Receiver finish the converge or separate on the optical layer. No need convert to electric signal which will decrease the signal's attenuation. So the optical signals are free from disturbances in the transmission and good for the long-distance transmission on large capacity.
DLX-DVOPC Electric Convergence type Fiber Optic Transmitter and Receiver can transmit up to 8channels optical signals over one fiber(one channel optical signal support 1-8channels video).All videos will been recovered in the end of receiver.
DLX-DVOPC Convergence type Fiber Optic Transmitter and Receiver been used for save fibers. High stability, easy to manage and install
APPLICATIONS
High Way & Toll Station Surveillance
Public Security Surveillance
Surveillance and cable TV system
Intelligent traffic monitoring system
High Quality Video Conference
Broadcast and TV program transmission
Long-distance multimedia teaching
Industrial Closed Circuit Television Surveillance
FEATURES
High-quality optical components for ensure the reliability, uniformity and stability.
No intermodulation interference of analog optical transmitter and receiver
No EMI, RFI, and Loop of sharing the ground
Using industrial grade components to assure the stability and reliability while longtime work.
Auto PAL/NTSC/SECAM Compatible
Data signal support RS232,RS458,RS422,Manchester and Biphase.
In the budget arrange, SNR >67db.
Indicators for Power Supply, Video, Optic-link and Data-loop
Advanced Audio, data auto-negotiation technology, don't need adjust for various audio, data signals
Support base on SNMP standard e-MS network management system, easy to monitor and manage large-scale video transmission network
The longest transmission distance is more than 100KM(between two points)
Support plug and play
Module design, easy to add the operation channels
Card type, standalone type,19" 1U/2U/4U Rack type optional
SPECIFICATIONS
Optical index of Optical Convergence
Center Wavelength | 1260nm ~ 1360nm, 1470nm ~ 1610nm (Single-mode) |
Space of wavelength | 20nm |
Sending power | -5 dBm ~ +3dBm |
Receiving power | -24 dBm ~ -3dBm |
Light through bandwidth | + / - 6 nm |
Temperature drift of launch center wavelength | 0.08nm-0.1nm |
Receiving Sensitivity | ≤-26dBm |
Connector | FC,SC |
Wavelength of User end | SM: 1200nm,1610nm MM: 850nm |
Optical index of Electric Convergence
Wavelength | Simplemodule:1310nm/1550nm, Multimode:850nm/1310nm |
Number of fiber | Single fiber bi-direction |
Output power | -9dBm/-5dBm |
Transmission distance | 0-100KM |
Receiving Sensitivity | More than -36dBm |
Connector | FC/SC/ST/LC |
Video
Channel | 1-32 |
Connector | BNC |
Bandwidth | 8MHz |
Quantization | 10 bits |
DG | 1% typical |
DP | 1° typical |
SNR | >67dB |
Audio (optional)
Audio Input/output impedance | 600ohm(balanced) or 10Kohm(unbalanced) |
Digitization | 24bit |
Bandwidth | 20Hz to 20KHz |
Nonlinear distortion coefficient | ≤ 1% |
SNR | >85dB |
Connector | Terminal Plug with screw clamps/RCA/XLR |
Data (optional)
Interface Type | RS-232/485/422, Manchester, Biphase |
Operation Mode | Full-duplex/Half-duplex |
Data Rate | DC-384Kbps/DC-2Mbps |
BER | <10E-9 |
Connector | RJ45/ Terminal Plug with screw clamps |
Environmental
Operation temperature | -30°C~+75°C |
Storage temperature | -40°C~+85°C |
Relative humidity | 0-95% Non-Condensing |
MTBF | ≥10e5 hours |
Power Supply | AC 100V~260V or DC 48V |
Physical Dimensions
Optical Convergence type | 196(L) x 155(W) x 45(H)mm |
Electric Convergence type | 480(L) x 250(W) x 45(H)mm |
