Characteristics of General Style PU FOAM:
1\Pre-foam(can save 30% than the post-foamed products )
2\One bottle of this foam can fill 2.5 standard windows.
3\Waterproofing and thermal insulated.
4\Make the installation more convenient and prompt; save labor cost.
5\Two types (gun type and straw type) meet your different needs.
6 Pest control, anti-mildew and so on.
Important suggestion:Technical Data Sheet:
Performance | Model |
General Style PU FOAM | |
Main component | Polyurethane Prepolymer |
Density(KG/M3) | 17±6 |
Expansion Multiple(time) | Max. 60 |
Tack- free Time(minute) | Max. 10 |
Cuttable Time(30mm diameter)(minute) | Approx. 60 |
Optimal Application Temp.(℃) | +5~+35 |
Min. Application Temp.(℃) | +18~+25 |
Min Temp. of can(℃) | 5 |
Tensile Strength(Aluminum Plate)(KPA) | 10 |
Dimensional Stability | 120 |
Water Permeability | ±3% |
Water Permeability | None |
Temp. Resistance(Long Term)(℃) | -30~+80 |
Temp. Resistance(Short Term)(℃) | -40~+110 |
Contents of formaldehyde and benzene | None |
Thermal Conductivity(W/M.K) | 0.042 |
Corrosion Resistance | Qualified |
Fire Retardant Factor | |
Toxicity after curing | None |
Shelf Life(18~22℃, store upside) (Month) | 9 |
Application temperature:
Temperature of can:+5℃~+35℃ +5℃~+35℃
Optimal application temperature: +18℃~+25℃ Attention:
No grease and dust on the application surface.
To ensure no deforming, please do not spray water on the wooden frame.Before using Polyurethane Foam, please carefully read the introduction and dangerous marks on label. Using gun type PU Foam, suggest you use assorted Shuode Spray Gun. To clean uncured foam, please use Shuode PU Foam Cleaner; to clean cured foam, you can adopt mechanical method.