Valves

pneumatic diaphragm three valve dual spool upper and lower guide structure, equipped with multi spring actuator, valve for the four structures.

films through single seat pneumatic control valve driven by the top structure, equipped with multi spring actuator. Has the advantages .

Model NO.: OVWD62(6, 8, 7)1X
Connection Type: Welding
Valve Body:Forge Welding
Driving Mode:Pneumatic
Material of Seal Surface: Soft Sealed

Pneumatic control valve is a compressed gas as power source, using the cylinder as the actuator and valve positioner, aid, converter.

Actuator: Stainless steel
Working Pressure: 0.05-0.95 Mpa
Long lifespan

1.Large Flux, low Resistance, No Water-hammer Y-type Shape Enlarged The Flowing Section, which Could Raise The Flux By 30% And Make Flow More Smooth

Model NO.: Q61(6, 8, 2)1F
Connection Form: Female/Male Thread, Flange, Welding, Hoop
Valve Body Material Available: Stainless Steel 304, 304L, 316,

Body SS316
Coil Special Copper Wire (H)
Standard voltage : 24VDC,110VAC, 220VAC
DIN43650A connector Coil is interchangeable

pneumatic bellows valve is in single seat pneumatic (sleeve) based control valve with bellows for sealing, the guide structure.

Threaded Pneumatic Angle Seat Valve with Stainless Steel Actuator
Double Acting or single acting actuator
Rack & pinion design
With SS304 Actuator

1.Large Flux, low Resistance, No Water-hammer Y-type Shape Enlarged The Flowing Section, which Could Raise The Flux By 30% And Make Flow More Smooth

Thread: BSPT, NPT , BSP.
The standard product fluid temperature is 80°C(NBR).
Temperature:Viton(130°C), Silicon(130°C), PTFE(185°C).

It is particularly applicable to the engineering pipeline for gas separation by pressure swing adsorption such as hydrogen, carbon dioxide, oxygen.

EMC Series Stainless Steel Angle Seat Valve
This Series' medium:water,neutral gas or liquid,ethanol,oil,organic solvent,steam,alkalescent etc.

Flanged Pneumatic Angle Seat Valve with Stainless Steel Actuator
Double Acting or single acting actuator
Rack & pinion design
With SS304 Actuator

Connection Form: Single Flange/Double Flange
Size: 4"-16"
Valve Body Material: High Pressure Cast Aluminum Alloy
Butterfly Plate Material: Polymeri

1.Large Flux, low Resistance, No Water-hammer Y-type Shape Enlarged The Flowing Section, which Could Raise The Flux By 30% And Make Flow More Smooth

Sanitary Pneumatic Butterfly Valve
304/316L sanitary butterfly valve with positioner
Material:304/316L
Size:DN10-DN300,1/2 to 12"

Actuator Size: Φ63,Φ80Stainless steel
Working Pressure: 0.05-0.95 Mpa
Temprature Range: -10 to +180 °C with PTFE seal

Tri-Clamp Ends Pneumatic Angle Seat Valve with Stainless Steel Actuator
Double Acting or single acting actuator
Rack & pinion design
With SS304 Act