Valves

pneumatic diaphragm three valve dual spool upper and lower guide structure, equipped with multi spring actuator, valve for the four structures.

films through single seat pneumatic control valve driven by the top structure, equipped with multi spring actuator. Has the advantages .

Model NO.: OVWD62(6, 8, 7)1X
Connection Type: Welding
Valve Body:Forge Welding
Driving Mode:Pneumatic
Material of Seal Surface: Soft Sealed

Our difference with others
1) All bolts & Nuts are SS304
2) All Piston are hard anodizing
3) Packing:Foam + small carton box to protect goods

Pneumatic control valve is a compressed gas as power source, using the cylinder as the actuator and valve positioner, aid, converter.

Actuator: Stainless steel
Working Pressure: 0.05-0.95 Mpa
Long lifespan

1.Large Flux, low Resistance, No Water-hammer Y-type Shape Enlarged The Flowing Section, which Could Raise The Flux By 30% And Make Flow More Smooth

Our difference with others
1) All bolts & Nuts are SS304
2) All Piston are hard anodizing
3) Packing:Foam + small carton box to protect goods

The low temperature cut-off valve product introduction:
Forged steel cryogenic valves have two kinds of valve cover ......

Model NO.: Q61(6, 8, 2)1F
Connection Form: Female/Male Thread, Flange, Welding, Hoop
Valve Body Material Available: Stainless Steel 304, 304L, 316,

Cryogenic ball valve is suitable for service of working temperature down to -196ºC, such as LNG, LPG, and air separation industry.

Body SS316
Coil Special Copper Wire (H)
Standard voltage : 24VDC,110VAC, 220VAC
DIN43650A connector Coil is interchangeable

pneumatic bellows valve is in single seat pneumatic (sleeve) based control valve with bellows for sealing, the guide structure.

Threaded Pneumatic Angle Seat Valve with Stainless Steel Actuator
Double Acting or single acting actuator
Rack & pinion design
With SS304 Actuator

1. Stainless steel
2. Convenient to install
3. Service life is long

1.Large Flux, low Resistance, No Water-hammer Y-type Shape Enlarged The Flowing Section, which Could Raise The Flux By 30% And Make Flow More Smooth

Our difference with others
1) All bolts & Nuts are SS304
2) All Piston are hard anodizing
3) Packing:Foam + small carton box to protect goods

Cryogenic ball valve is suitable for service of working temperature down to -196ºC, such as LNG, LPG, and air separation industry.

Thread: BSPT, NPT , BSP.
The standard product fluid temperature is 80°C(NBR).
Temperature:Viton(130°C), Silicon(130°C), PTFE(185°C).

It is particularly applicable to the engineering pipeline for gas separation by pressure swing adsorption such as hydrogen, carbon dioxide, oxygen.