Valves

HERION solenoid valves designed according to Europe traditional styles,their performance are very stable,completed sizes fit for different system

A pneumatic solenoid valve is a switch for routing air to any pneumatic device, usually an actuator, allowing a relatively small signal to control

Our company products, solenoid valvel,solenoid coil,water coils, automotive valve coil, pulse valve coil are produced according to the ISO9001:2000 st

pneumatic diaphragm three valve dual spool upper and lower guide structure, equipped with multi spring actuator, valve for the four structures.

safety valve, pressure relief valve, safety relief valve, safety valve temperature, high temperature safety valve, high pressure safety valve.

Differential pressure: 0,35 - 8,5 bar [1 bar = 100kPa]
Ambient temperature range: -20 to +85°C
Coil insulation class: F

Operate:full-opening, annulus pressure operated
Product model: Select Tester Valve
Working pressure:10000psi~15000psi
Application: oil well testing

Air non-return valve check valve for air conditioner 1 inch pneumatic One way valve
Aluminum Alloy;
female ;
high quality .

pulse jet valve ,size:1-1/2" ,orifice:40mm ,NBR or Viton diaphragm ,voltage:24V DC,110V AC,220V AC ,working pressure :3-8Bar,Ambient temp:-5℃~55℃

it mainly used for high inlet pressure requirements, suitable forhigh purity gas, standard gas, corrosive gas, and other gas.

solenoid valve is the interface between electronic controllers and pneumatic systems.

Our company products, solenoid valvel,solenoid coil,water coils, automotive valve coil, pulse valve coil are produced according to the ISO9001:2000 st

films through single seat pneumatic control valve driven by the top structure, equipped with multi spring actuator. Has the advantages .

1)Code:K4502 ,K4503 ,K5004 ,K5000 , K7600 ,K7601
2)Material: Nylon - NBR or VITON diaphragm
3)Same as Goyen type
4)ISO9001 &CE

Connecting Type: Flange Medium: Steam Medium Temperature: Below 550 Deg C Usage: Overpressure Protection Device Application: Steam Pipeline Trademark:

THINKTANK focused on manufacturing control valve, shut off valve, butterfly valve, knife gate valve, ball valve, globe control valve, self-operated pr

Productivity:50 Thousand;Min. Order:10 pcs;Packing:Carton, Wooden Case;Transportation:By Sea or By Air;DeliveryDate:15 Days;PaymentTy

200 series solenoid valves are the most popluar used solenoid valves in all directional control valves because of medium size,flow rate & long life

The valve which is called check valve horizontal one-way valve,which is used for screw compressor.
Application: Screw compressor service valve

Type:full bore drill stem testing 5" Select Tester Valve
Materiall:Alloy
Service:H2S, CO2
Standard:NACE MR0175
Operate:Full-opening, annulus press