auto garage door

5#Hinge
GDP1005
DEC:5#Hinge
Thickness:1.8mm
For use with 11mm diameter roller...

DEC: Industrial Joint Angle Iron
The angle iron is made of 2mm steel and is provided
with slotted holes and suitable for the fixing of track.

‧11 GAUGE HINGE # 1 ~ # 12
‧BRIGHT ZINC PLATED 11 GAUGE STELL HINGE LEAVES
‧FULL BODY 3" WIDE ‧FOR USE WITH 7/16" DIAMETER STEM ROLLERS

DEC:Small Size Pusher Spring
The is Provided with 2 Inch rubber stop for use small door pusher
Thickness:2.5mm
Finish:zinc plate

PUSHER SPRINGS 27"
12 GAUGE BRACKET WITH MOUNTING SLOTS
ZINC PLATED STEEL TOTAL LENGTH: 27".15" COMPRESSION

2"black nylon rollers
4" zinc plated stem
rating 50 lb lading at 100000 8" door cycles

DEC:Residential Bearing Bracket
The bearing bracket is provided with a 1 Inch bearing installed.
Both left and right available.

DEC:Residential Bearing Bracket
The bearing bracket is provided with a 1 Inch bearing installed.
Both left and right available.

T-handle Lock
handle lock with one word key
zinc plated
bright chrome finished

Track Bottom Bracket
DEC: Track Bottom Bracket,The bracket is suitable for inside cable fixing for 2 "tracks
The advised max door weight is 100kgs

Residential top Bracket
The bracket is provided with an assembled roller slides and suitable for residential overhead doors.
Thickness:1.5mm
Finish

Description: Side Brackets
The bracket is provided with slotted holes and suitable for the fixing of tracks
Thickness:2.5mm
Finish:zinc plate

DEC: Spring Break Protection
1 Inch Bore
Spring break protection device. use 2 5/8spring fitting
Finish:zinc plated

DEC:Commercial Bearing Bracket
The bearing bracket is provided with a 1 Inch bearing installed.

DEC:Plastic Bearing
The interior diameter is 25.4mm

3-3/4' spring fittings
Max. wire size: 0.331" diameter
set includes 1 winding and 1 stationary
color coded winding fittings
set screw

1-3/4" Spring fittings
Max.wire size:0.295" diameter
set includes 1 winding and 1 stationary
color coded winding fittings
set screws

3" 10 BALL STEEL ROLLER
9" STEM ( WORKING LENGTH = 8 1/2" )
BULGED SHOULDER

18 GAUGE HINGE # 2
BRIGHT ZINC PLATED 18 GAUGE STELL HINGE LEAVES
FULL BODY 2 3/4" WIDE
FOR USE WITH 7/16" DIAMETER STEM ROLLERS
H18G01 0.35 lb

Chain hoist for the garage door parts
Chain hoist including the metal case, gears and the chain,
the reduction of the gears including 6.6:1, 3:1

16 GUAGE GALVANIZED TUBE SHAFT 1"O.D.9'LONG FOR 8'DOOR
16 GUAGE GALVANIZED TUBE SHAFT 1"O.D.10' LONG FOR 9'DOOR

Spring Fitting
zinc plated

18 GAUGE HINGE # 4
BRIGHT ZINC PLATED 18 GAUGE STELL HINGE LEAVES
FULL BODY 2 3/4" WIDE
FOR USE WITH 7/16" DIAMETER STEM ROLLERS
H18G01 0.35 lb

Product Code：GDP5027
BRIGHT CHROME PLATED

Productivity:100000 PCS;Min. Order:200 PCS;Packing:CNTS/PLTS;Transportation:by air or sea;DeliveryDate:20 DAYS;PaymentType:T/T;Trademark:GDP;Specific

For Overhead Garage Door, Industrial Garage doors, Residential garage doors,Commercial garage door parts, sectional garage door parts, Rolling garage

DEC:Commercial Inside Slide Latch
Include cases,bar,spring and screws.
Case:1.5mm steel. Bar:4mm steel.
The center line of the fixing holes is 102

16 GUAGE GALVANIZED TUBE SHAFT 1"O.D.9'LONG FOR 8'DOOR
16 GUAGE GALVANIZED TUBE SHAFT 1"O.D.10' LONG FOR 9'DOOR

‧END STILE LATCH SPRING ACTUATED INSIDE LOCK 
   ASSEMBLY
‧7 1/2" LOCK BAR WITH 2 1/8" THROW
‧BRIGHT ZINC PLATED STEEL

2" 07 BALL STEEL ROLLER WITH ZINC PLATED STEMS
4" STEM ( WORKING LENGTH=3 1/4" )
BULGED SHOULDER
HARDENED RACES