carbon mechanical seal

this kind of mechanical seals parts is used in mechanical seals.it is very popular in this line.

it is original flygt pump seals/ used for flygt pump 2040 /2102
Shaft size: 22m
material: carbon, tungsten
Lower seal same with upper seal

It to suit I.M.O pump . pump mechanical seal parts for triple rotors screw pump
fuel oil supply system for ship in marine. Boat mechanical seals.

Materials:
Stationary Ring: CA/SIC/TC
Seal Face: SIC/TC
Sedondary Ring: NBR/VITON/PTFE
Spring & Other Parts: 304/316

High qulity AES CDSA Double Cartridge Seals.The standard seal unit is 316 Stainless Steel with Carbon and Silicon Carbide faces and Viton O' rings.

SIHI PUMP STERLING GNZ SEALS. Standard balanced mechanical seals. The friction side of the rotating portion is made from silicon carbide .

this kind of mechanical seals parts is very popular in this mechanical seals line .

A) Cartridge mechanical seals, convenient installation, no need to adjust;
B) The spring is outside installation, so it can be proted

Balanced Dual mechanical seal. It replacment burgmann AX25D BOULE MECHANICA SEALS. WORKING WELL FOR PUMPS

Multi-Spring Mechanical Seal (TSC59U)
A robust bellow seal, with a wide non-DIN cross section, for optimum flexibility and durability

it is original flygt pump seals/ used for flygt pump 2024/2066/2075/2101/3065/3080
Shaft size: 20m
material: carbon, tungsten
Lower seals

This Seal Kits to ALFA LAVAL PUMPS LKHI,LKHP,LKHSP and LKH 100 Series pumps.it replacment type 192, AES TY[E MP07U Mechanical seals

Robust and easy to install design
Springs protected from the product
No metal parts on the product side
Simple conversion of gland packings

single cartridge seal mechanical seal AES CURC.We also have other cartridge seals, simlar as Johncrane cartridge seal, AES cartridge seal, Burgamnn...

Grunfos SARLIN seals kit. used water pumps Mechanical seals. used in conjunction with AESSEAL SSAIS06 mechanical seals.

Pressure:0~1.6Mpa
Temperature:-20℃~180℃
Rotating speed:≤20m/s
Medium: Oil, water, salt, base, organic solvent and so on

FTHRN has the same design and size as the original Bergmann HRN which can be a good substitute for the original product. suitable godwin pump

Introduction:Operating limits
Pressure:≤1.2MPa
Temperature:-60℃~180℃
-20℃~230℃
Linear speed:≤25m/s

replacement the original seals for Flygt and Grindex Pump Seals. our parts are specifically developed or selected to work perfectly in flygt pumps

it is original flygt pump seals/ used for flygt pump 2024/2066/2075/2101/3065/3080
Shaft size: 20m
material: carbon, tungsten

For industrial pump, replace the mechanical of Burgmann and John Crane mechanical seal

replacement the original flygt pump 2024.2066.2075.2101.3065.3080 .our parts are specifically developed or selected to work perfectly in flygt pump

multiple spring. balanced seal. ubsude mounted. Elastomer o-ring seal.seals can be repaired easily on-site or at any John Crane Service Center.

material :
staitonary ring :sic/TC
Rotary ring :carbon/sic/tc
secondary seal:NBR/EPDN/VITON
Spring and metal parts:starinless steel

equivalent to John Crane type 587 used for Andritz S series pumps SMT/TAN. High Temperature 587 Mechanical Seal for Paper-making Equipment

crane type2100 pump mechanical seals. a compact, unitized, single spring, elastomer bellows mechanical seal ,replace AES BO5 seals.sterling 540

Combined Materials:
Stationary Ring (Ceramic/SiC/TC)
Rotary Ring (Carbon/SiC/TC)
Secondary Seal (NBR/EPDM/Viton)
Spring and Metal Part (Steel)

It to suit I.M.O pump with size 22mm. pump mechanical seal parts for triple rotors screw pump
fuel oil supply system for ship in marine.

It raplace burgmann H7N, H76, H75.
Specifications
1.Single face mechanical sealing
2.Balanced
3.wave spring ...

PTFE Wedge mechanical seals
Operating Conditions:
Temperature:-40oC~250oC
Pressure: ≤2.5Mpa
Speed: ≤ 20 m/Sec