garage doors

DEC:Residential Bearing Bracket
The bearing bracket is provided with a 1 Inch bearing installed.
Both left and right available.

T-handle Lock
handle lock with one word key
zinc plated
bright chrome finished

Track Bottom Bracket
DEC: Track Bottom Bracket,The bracket is suitable for inside cable fixing for 2 "tracks
The advised max door weight is 100kgs

Residential top Bracket
The bracket is provided with an assembled roller slides and suitable for residential overhead doors.
Thickness:1.5mm
Finish

Description: Side Brackets
The bracket is provided with slotted holes and suitable for the fixing of tracks
Thickness:2.5mm
Finish:zinc plate

DEC: Spring Break Protection
1 Inch Bore
Spring break protection device. use 2 5/8spring fitting
Finish:zinc plated

DEC:Commercial Bearing Bracket
The bearing bracket is provided with a 1 Inch bearing installed.

DEC:Plastic Bearing
The interior diameter is 25.4mm

3-3/4' spring fittings
Max. wire size: 0.331" diameter
set includes 1 winding and 1 stationary
color coded winding fittings
set screw

1-3/4" Spring fittings
Max.wire size:0.295" diameter
set includes 1 winding and 1 stationary
color coded winding fittings
set screws

3" 10 BALL STEEL ROLLER
9" STEM ( WORKING LENGTH = 8 1/2" )
BULGED SHOULDER

18 GAUGE HINGE # 2
BRIGHT ZINC PLATED 18 GAUGE STELL HINGE LEAVES
FULL BODY 2 3/4" WIDE
FOR USE WITH 7/16" DIAMETER STEM ROLLERS
H18G01 0.35 lb

Chain hoist for the garage door parts
Chain hoist including the metal case, gears and the chain,
the reduction of the gears including 6.6:1, 3:1

DEC:U HOOK
GARAGE DOOR INSTALL PARTS
Finish: Zinc plate

16 GUAGE GALVANIZED TUBE SHAFT 1"O.D.9'LONG FOR 8'DOOR
16 GUAGE GALVANIZED TUBE SHAFT 1"O.D.10' LONG FOR 9'DOOR

Spring Fitting
zinc plated

18 GAUGE HINGE # 4
BRIGHT ZINC PLATED 18 GAUGE STELL HINGE LEAVES
FULL BODY 2 3/4" WIDE
FOR USE WITH 7/16" DIAMETER STEM ROLLERS
H18G01 0.35 lb

Product Code：GDP5027
BRIGHT CHROME PLATED

DEC:Commercial Inside Slide Latch
Include cases,bar,spring and screws.
Case:1.5mm steel. Bar:4mm steel.
The center line of the fixing holes is 102

16 GUAGE GALVANIZED TUBE SHAFT 1"O.D.9'LONG FOR 8'DOOR
16 GUAGE GALVANIZED TUBE SHAFT 1"O.D.10' LONG FOR 9'DOOR

‧END STILE LATCH SPRING ACTUATED INSIDE LOCK 
   ASSEMBLY
‧7 1/2" LOCK BAR WITH 2 1/8" THROW
‧BRIGHT ZINC PLATED STEEL

2" 07 BALL STEEL ROLLER WITH ZINC PLATED STEMS
4" STEM ( WORKING LENGTH=3 1/4" )
BULGED SHOULDER
HARDENED RACES

2" NYLON ROLLER
4" ZINC PLATED STEM WORKING LENGTH = 3 5/8"
BULGED SHOULDER
RATING :50-LB LOAD @ 10,000-8' DOOR CYCLES

GDP1016
DEC: Center Hinge
Thickness:1.8mm
For use with 11mm diameter roller
Finish: zinc plated

GDP1018
DEC: Height Finger Protection Central Hinges
Thickness:1.8mm
For use with 11mm diameter roller
Finish: zinc plated

AUTO LATCH STRIKER
BRIGHT ZINC PLATED STEEL 14 GAUGE
2 1/4" LONG SLOT FOR ADJUSTMENT
DEEP NOTCH FOR POSITIVE ENGAGEMENT

GDP1016--B
DEC: Center Hinge
Thickness:1.8mm
For use with 11mm diameter roller
Finish: zinc plated

2" 11 BALL NYLON TIRE ROLLER WITH ZINC PLATED STEM
7" STEM ( WORKING LENGTH=6 1/4" )

plastic Lock
handle lock with one word key
zinc plated
bright chrome finished

T-handle Lock
handle lock with one word key
zinc plated
bright chrome finished