loss tester

APGS different frequency automatic dielectric loss tester is a high-precision instrument, which can be applied to automatically measure electrical

Power Type AC 220V 50Hz,1A

POL= power meter + laser source + VFL

GDGS Automatic 10KV Power Transformer Dielectric Loss Tester

1. Measure the transformer load current, load loss, short-circuit voltage, short circuit (load) losses.
2. Harmonic test can be analyzed to 31 harmon

Range: Capacitance: 3pF ~ 60nF
Accuracy: a) Capacitance accuracy: ± (1.0% of reading + 5pF) b) Dielectric loss accuracy: ± (1% of reading + 0.04%) c)

DSHS-1 Slurry Water Loss Tester is used to determine the water loss of drilling slurry.

Power AC 220V 50Hz 1A
Display 4 Digits LED
Frequency 50Hz, 60Hz
Induction Range Bm1: 0.5 ~ 1.0T, Bm2: 1.0 ~ 1.5T, Bm3: 1.5

1.For abrasion test
2.Digital display and adjustable
3.Complies to ASTM D3910
Abrasion Loss Tester

Wet Wheel Abrasion Loss Tester is suitable to determine resistance to abrasion loss of shaped emulsified asphalt slurry seal mixture.

PE-AORDF is a highly precise instrument, which can be applied to measure Resistance, Dissiptaiton Factor and Capacitance of Oil under test

GDGS Automatic Dielectric Loss Tester
1.favorable price
2.high quality
3.good after service

It can test various parameters such as transition waveform, transition time, transition resistance and three phase synchronization one time and analyz

The instrument is suitable to determine water loss of slurry at the drilling field or in the laboratory.

I. Product standard:
1) DSHS-1 Slurry Water Loss Tester is used to determine the water loss of drilling slurry if it goes through a certain size o

determine resistance to abrasion loss of shaped emulsified asphalt slurry seal mixture. The instrument is applied to decide the preferred asphalt

Mud fluid loss tester

There are PT inside and the high voltage standard capacitor making the wire connection easy.

DSHD-0752 Wet Wheel Abrasion Loss Tester is designed and developed as per T0752 "Emulsified Asphalt Slurry Seal Mixture Wet Wheel Abrasion Loss Test"

T0752 "Emulsified Asphalt Slurry Seal Mixture Wet Wheel Abrasion Loss Test" in the Industry Standard JTJ052 Specification and Test Methods of Bitumen

DSHD-0618 Asphalt Chemical Constituent Tester(Four Constituents Methods)

GDGS Tan Delta Automatic Dielectric Loss Tester is applied to meaure the dielectric loss and capacitor value of insulating materials.

The instrument is designed and made as per T0752 "Emulsified Asphalt Slurry Seal Mixture Wet Wheel Abrasion Loss Test" in the Industry Standard JTJ0

GDGS Automatic Dielectric Loss Tester
1.favorable price
2.high quality
3.good after service

Main features: There are PT inside and the high voltage standard capacitor making the wire connection easy.

DSHS-1 Slurry Water Loss Tester is used to determine the water loss of drilling slurry if it goes through a certain size of filtration area within a

This asphalt mass loss tester is suitable to determine the mass loss of petroleum asphalt thin film after been heated.

First, an overview ofHRWGS-Y-type integration of precise oil volume resistivity dielectric loss

The instrument is designed and made as per T0752 "Emulsified Asphalt Slurry Seal Mixture Wet Wheel Abrasion Loss Test" in the Industry Standard JTJ0

1.Test result is nicety and reliable
2.electrinic timing setting
3.motor runs stably
4.favorable price
5.manufacture