outdoor fiber optic cable

This ring type drop wire clamp mostly used with optical fiber drop cable. This drop clamping device is necessary for FTTx solutions.

LC UNIBOOT Patch cord Fiber optic cable
1. Low insertion loss
2. High resistance of corrosive

sed to OPGW construction,two anti twist running board .the gap of anti twist running board is 2m

FTT-16 Fiber Optic Termination Box with Splitter 2 pcs of 1X8 PLC or 1 pcs of 1x16 PLC
For wall mounting or floor application

The fiber,250um,are positioned in a loose tube made of high modulus plastic.The tubes are filled with a water-resistant filling compound.

The fiber,250um,are positioned in a loose tube made of high modulus plastic.The tubes are filled with a water-resistant filling compound.

The fiber,250um,are positioned in a loose tube made of high modulus plastic.The tubes are filled with a water-resistant filling compound.

The fiber,250um,are positioned in a loose tube made of high modulus plastic.The tubes are filled with a water-resistant filling compound.

The fiber,250um,are positioned in a loose tube made of high modulus plastic.The tubes are filled with a water-resistant filling compound.

The fiber,250um,are positioned in a loose tube made of high modulus plastic.The tubes are filled with a water-resistant filling compound.

The fiber,250um,are positioned in a loose tube made of high modulus plastic.The tubes are filled with a water-resistant filling compound.

The fiber,250um,are positioned in a loose tube made of high modulus plastic.The tubes are filled with a water-resistant filling compound.

Hot sell Indoor multi purpose distribution cable,
Direct sell from manufacture,
National telecom-level quality
Ease after-sales service

Product Name:All Dielectric Self-supporting Aerial Cable
Model:ADSS
Number:S001

19' standard rack design with static-spray, nice looking;
Suitable for FC, SC, ST, duplex LC adapter;
430 x 300 x 1U (mm), 12 cores

The MDU232 Splitter Terminal from Optic Network Technology is rugged, low cost, low profile interconnection between central office and multi-dwelling

1.Distribution fiber optical cable , 4-24 core fiber optic cable
2.Indood fiber cable.
3.Used for inter connection of building ,pigtail, patch cord.

Fully compliant with standards of IEC and YD-T826/1996

1. GYXTW fiber optical cable .
2. outdoor 2-12 core single mode fiber optic cable.
3.cores can be follow customer requested .

The design of MDU 212 splitter terminal combines the functionality of a local convergence cabinet with MDU terminal.

- FTTH cables
- Can be used as access building and drop cable
- Used indoor application

- Fiber to the Premise (FTTP)
- Fiber to the Home (FTTH)
- Passive Optical Networks (PON)
- Local Area Network (LAN)
- Cable Television (CATV)

Bare fiber diameter:125μm²
fiber type:Single fiber and Ribbon fiber exchangeable
Cleaved length:5~30mm
Cutting angle:0.5 degree

The design of MDU 208A splitter terminal combines the functionality of a local convergence cabinet with MDU terminal.

- Hot melt adhesive
- Ceramic reinforcement member
- Heat shrinkable tube

The Cable laying machines over two pairs of propelled pulleys. Two counter pulleys press the cable into the grooves of the two driving pulleys.

The Cable laying machines over two pairs of propelled pulleys. Two counter pulleys press the cable into the grooves of the two driving pulleys.

The Cable laying machines over two pairs of propelled pulleys. Two counter pulleys press the cable into the grooves of the two driving pulleys.

The Cable laying machines over two pairs of propelled pulleys. Two counter pulleys press the cable into the grooves of the two driving pulleys.

The Cable laying machines over two pairs of propelled pulleys. Two counter pulleys press the cable into the grooves of the two driving pulleys.