plastic solenoid valves

Professional manufacturer of solenoid coil

Media:Steam, Hot Water, Oil, etc. Temp:20-200
Pressure:0.05-1.60MPa Material:Brass
Size: 1/2" 3/4" 1" 11/2" 2"
Seal: NBR,VITON, PTFE

1.CPG High Temperature Solenoid Valve
2.Piston pilot operated type, High-quality radiator;
3.Seals and valve can work long time under high temp

1.Model No:4V100-400 Series Baseplate
2.Working temperature:room temperature
3.Pressure:normal pressure environment
4.Uses:control

-Wet pin DC or AC solenoids with removable coil
-Solenoid coil can be rotated through 90 °
-Hand override, optional

A pneumatic solenoid valve is a switch for routing air to any pneumatic device, usually an actuator,

1. Valve flow channel using a special structural design, less internal impedance
2. Standard installation pattern for interchangeable to other brand

Solenoid valves, mechanical valves

US series two two way pilot valve has a wide range of thread sizes from 3/8" to 2".

E.MC pneumatics & hydraulics is always famous for strong R&D for all kinds of pneumatic components, especially pneumatic cylinders and valves.

Coil for kinds of solenoid valve can be made by order by kinds voltage and power and different kinds size.

auto-flush RO solenoid valve with flow limit.
auto-flush solenoid valve for water reverse osmosis system.
CE certified auto-flush RO solenoid valve.

1. Herion type solenoid valve
2. 2/3, 2/5 solenoid valve
3. Original products

.Rexroth hydraulic solenoid valve
maximum pressure(Mpa) 31.5
maximum flow(l/min) 14 35 63

Temperature resistant
special coil
frequent moves
long tested
high temperature ,hot water,HTF

2V series solenoid valve can use with air, water and oil. Usually, they are used to control Solenoid Valve for large flow. Also, they can be use

1.SM solenoid valve
2.Direct acting
3.Long lifespan with low power consumption at press
4.Applied to compressed air, water system

We are leading manufacturer and exporter of single coil pneumatic solenoid valves in China such as 4V110-06 solenoid valves with G1/8'' port size.

Fenghua Xinling Pneumatic Engineering Company is the leading supplier and manufacturer of two position five port double coil pneumatic solenoid valve.

1.brass material
2.Applied to a separate installation
3.Similar to Airtac type

Item No.:ALT238
Instruction:
1)2/2NC solenoid valve armature
2)Mainly used for special solenoid valve
3)Working voltage: AC/DC

Item No.:ALT281
Instruction:
1)2/2NC solenoid valve armature
2)Mainly used for pneumatic solenoid valve
3)Working voltage: AC/DC

1.ISO9001:2008
2.Supply:25000pcs/month
3.Good Quality:100% tested
4.for steam; vapour; reek; breath;

pulse jet valve ,size:2" ,orifice:50mm ,NBR or Viton diaphragm ,voltage:24V DC,110V AC,220V AC ,working pressure :3-8Bar,Ambient temp:-5℃~55℃

1.Model No.:VF Series Baseplate
2.Working temperature:room temperature
3.Pressure:normal pressure environment
4.The flow direction:reversing

4V series solenoid valves have 5/2 and 5/3 types, size from M5 to 1/2'',while 5/2 typs have single solenoid type and double solenoid type

.Body :forged brass
.Surface: nickel-plated
.handle:steel handle

Our company products, solenoid valvel,solenoid coil,water coils, automotive valve coil, pulse valve coil are produced according to the ISO9001:2000 st

With inlet and outlet port size of G1/4 and exhaust port size of G1/8 , is however, three position, five way type solenoid valve.

1. Max frequency: 5times/sec
2.insulation&protect classes: F IP65
3.shortest active time :0.05second
4.power consumption: AC:4.5VA DC:3W