inch ball bearings

Our Chrome steel balls are applied in bearings such as slew bearing, deep groove ball bearing, thrust ball bearing, self aligning ball bearing, double

Thin-Section Bearings consists of 5 open and 7 sealed series, bore diameter ranging from 1.000 inch to 20.000 inch, sizes of cross section range from

VLA200414N Slewing Bearings (304x503.3x56mm) Four Point Contact Ball Bearing INA High rigidity slewing turntable use Made in China

Double direction angular contact thrust ball bearings are designed to locate spindle shafts axially in both directions. These bearings are intended

61864M
61868M
61872M
61876M
61880M...

Luoyang precision bearing factory maily produce high precision bearings.

1) High quality steel, high grade balls;
2) High precision, long grease life, low noise, low vibration;
3) Quality assured, competitive price.

7000AC/C P4 Angular Contact Ball Bearing (10x26x8mm) FAG type High precision Spindle bearings

1.Mainly take radial load as well as certain axial load 2.Low friction and high speed 3.Low cost

Deep groove ball bearings mainly take radial load as well as take moderate axial load. With less coefficient of friction, high limiting speed.

The contact angle is usually 35°. If there is only a radial load, each steel ball contacts the raceway at four points

Luoyang precision bearing factory supply medium and large sized deep groove ball bearing.

Double direction angular contact thrust ball bearings are designed to locate spindle shafts axially in both directions. These bearings are intended

ISO9001:2008 certificate approved , OEM accepted
More than 20 years of manufacturing and export experience in bearings field

manufacturer of large diameter slewing bearings, military quality, max. O.D. 6300mm, yaw and pitch bearings for wind turbines, slewing bearing for TBM

Thin-Section Bearings consists of 5 open and 7 sealed series, bore diameter ranging from 1.000 inch to 20.000 inch, sizes of cross section range from

1. High precision, low noise and long life
2. High quality and best service
3. Reasonable and competitive price

run in high limited rotation speed,can take radial road and axial road at the same time,and can only take the pure axial load.

ball screw support bearing
ball screw bearing
nsk bearing
fag bearing
koyo bearing...

61819
61821M
61822
61824
61826M...

Name/Model: 635ZZ
Type: Deep groove ball bearings
Inside Diameter: 5 mm
Outside Diameter: 19mm
Thickness/Width: 6 mm...

Double direction angular contact thrust ball bearings are designed to locate spindle shafts axially in both directions. These bearings are intended

Our Chrome steel balls are applied in bearings such as slew bearing, deep groove ball bearing, thrust ball bearing, self aligning ball bearing, double

single-row angular contact ball bearings only can bear axial load, so they are assembled by pair.

Single row angular contact ball bearings can accommodate axial loads acting in one direction only.

Name/Model: 634ZZ NTN
Type: Deep groove ball bearings
Inside Diameter: 4 mm
Outside Diameter: 16mm
Thickness/Width: 5 mm...

Model NO.: JA025XP0
Brand: Kaydon Replaced
Dimension: 2.5*3.125*0.3125inch
Operating Temperatures:
-30 to +120...

Thin Section Deep Groove Bearings with their large complements of small diameter balls provide greater stiffness and lower torque while permitting a s

Thin-Section Bearings consists of 5 open and 7 sealed series, bore diameter ranging from 1.000 inch to 20.000 inch, sizes of cross section range from

Double direction angular contact thrust ball bearings are designed to locate spindle shafts axially in both directions. These bearings are intended