CL-Helicoil Kit including:
1. 25 CL-helicoil inserts
2. One CL-tap
3. One CL-drill
4. One CL-tang break off tool
5. One CL-helicoil insert tool
2. One CL-tap
3. One CL-drill
4. One CL-tang break off tool
5. One CL-helicoil insert tool
Brief Introduction:
Application: insert helicoils | Place of Origin: HenanChina (Mainland) | Brand Name: Changling(CL) |
Model Number:M2-M42 | Package:Steel Box | Mini Quanlity:10 |
Material(1):6542HSS | Material(2):304SS | |
CL-Helicoil Kit and Tools
CL-Helicoil Kit including:25 helicoil inserts
The CL-coil looks like spring, when it is assembled in matrix thread
its internal surface to be the standard thread.If CL-coil is assembled
with Screw, it could enhance the connection strength and abrasion
resistant, especially in AL, Mg, Cast Iron and other low strength materials.
CL-Helicoil Kit including :One CL-tap
Tap the hole using the Heli-Coil tap supplied in the kit.
Check the size on the shank of the tap to be sure it is the right size.
Tap the hole to sufficient depth to accommodate the insert length
and bolt or screw being used.
CL-Helicoil Kit including: One CL-drill
Drill out the damaged threads using the drill supplied in the kit.
Drill to a sufficient depth to accommodate the insert length
and the bolt or screw being used.
CL-Helicoil Kit including:One CL-tang break off tool
Remove the tang by using the tang break-off rod or a punch which
fits the inside of the insert.Place the punch or rod squarely on the
tang and strike sharply.
CL-Helicoil Kit including:One CL-helicoil insert tool
Install the appropriate length insert from the kit. Use the installation
tool supplied in the kit or set. Wind the insert into the hole until the
top coil is1/4 to 1/2 turn below the top surface.
CL-Helicoil ISO9001:2008 Certification
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
