1.Introduction
JBD series of WPC door board production line use the original wood-plastic technology companies and formula. Plates can be based on different sections, according to the different uses of sheet metal, product design different proportions. Selection of different specifications for the wood-plastic twin-screw extruder, and wood-plastic for single screw extruder, and the corresponding vacuum stereotypes targeting Taiwan, traction machines, horizontal cutting machine, expected over platforms such as auxiliary equipment.
2.Features
1)This technology is suitable to produce WPC products at high value with variety ofplastic and nature fiber,and the material is 90% of waste plastic and wastenatural fiber.
2)With scientific and reasonable technology,the machine has high efficiency and runsstably
3)The conical twin screw extruder is used to mix the wood and plastic,and get good homogeneousmelt.
4)This is one step WPC extrusion technology,which saves energy
5)This production line can produce wpc products of different specifications only tochange mold.
6)Imported PLCautomatic control.
3.Main Technical Parameter of WPC door board extrusion line
Power supply | 380V 3Phase 50HZ |
Raw material | PVC + Wood power (30-40%) |
Length of the product | 1500mm |
Width of the product | 600mm-800mm |
Thickness of the product | 25-45mm |
Output capacity | 300kg/h+-10% |
Line speed | 0-0.5m/min |
Total/Real power consumption | 180kw/120kw |
Compressed air volume | 0.3 M3/min 0.6Mpa |
Cycle cooling water | 5.5 M3/h 20 C.D. |
Dimension of whole extrusion line | 30000mm*3000mm*3500mm |
4.Process of PVC WPC hollow and wide door board production line
