Specification of Anodized Aluminum Sheet
1) Alloy: 1050 1060 1100 1235 3003 3102 5052 8011
2) Temper: H12 H14 H16 H18 H22 H24 H26 O
3) Thickness: 0.2mm--8.0mm
2) Temper: H12 H14 H16 H18 H22 H24 H26 O
3) Thickness: 0.2mm--8.0mm
Application of Anodized Aluminum Sheet
Anodized aluminum plate widely used in Aluminum ceiling, wall panels, aluminum panels, fire panels, aluminum honeycomb, aluminum veneer, electrical panels, cabinet panels, furniture panels, etc.
Advantages of Hot Rolling Anodized Aluminum Sheet
(1) Good processing property
(2) Good weather ability
(3) Remain same color, no corrosion, no oxidation, no rust
(4) High fireproofing, pure metals without any paint and chemical substances on surface, not burn at 600 degrees, not produce toxic gas and meet the environmental needs.
(5) Strong stain-resistance.
Technical Information:
Items | Technical Index | Result | conclusion |
Density of surface | specified value:±0.5kg/m2 | 5.32kg/m3 | Qualified |
Bending strength | ≥100Mpa | 121Mpa | Qualified |
flexuous modulus of elasticity | ≥2.0×104Mpa | 3.12×104Mpa | Qualified |
through resistance | ≥9.0KN | 9.94KN | Qualified |
cutting strength | ≥28.0Mpa | 32.0Mpa | Qualified |
180°peel strength | ≥7.0N/mm | 11.2N/mm | Qualified |
Temperature allowance | 20 cycles without change from -20°C to 80°C | Unchanged | Qualified |
Heat deformation temperature | ≥95°C | 120°C | Qualified |
Coefficient of heat expansion | ≤4.00×10-50C-1 | 1.98×10-50C-1 | Qualified |
Salt haze resistance | No less than grade 2 | Grade 1 | Qualified |
The test results meet the index requirements of quality products of GB/T17748-1999 |