silicon seal face
Sintered in HIP Furnace
ISO9001:2000 Certificate
Material in Fine Grain Size
silicon seal face
1.Sintered in HIP Furnace
2.Useage: fhigh speed rolling steel wires
3.trial order acceptable
4.100% virgin powder
Sintered in HIP Furnace
ISO9001:2000 Certificate
Material in Fine Grain Size
silicon seal face
1.Sintered in HIP Furnace
2.Useage: fhigh speed rolling steel wires
3.trial order acceptable
4.100% virgin powder
5.Good precision
6.high wear resistance
7.convenient transport and payment...
Application requirements of dimensional cemented carbide roll rings
1. Any striking on and collision with roll rings is strictly prohibited.
2. When installing the whole assembly of roll rings, the clearance of the bearings in relation to the casings should be on the tighter side .
3. The precision of rotation of the whole assembly ( circular runout and end runout ) should be kept within ±0.05mm.
4. The fitting -in of the whole assembly and the roll rings shall be a transitional fitting -in and fastened.
5. The roll rings should not be cooled by water or oil water emulsion.
6. The joints of the pipes in the internal cooling system should not be leaky and it is advisable that no cooling is applied.
7.convenient transport and payment...
Application requirements of dimensional cemented carbide roll rings
1. Any striking on and collision with roll rings is strictly prohibited.
2. When installing the whole assembly of roll rings, the clearance of the bearings in relation to the casings should be on the tighter side .
3. The precision of rotation of the whole assembly ( circular runout and end runout ) should be kept within ±0.05mm.
4. The fitting -in of the whole assembly and the roll rings shall be a transitional fitting -in and fastened.
5. The roll rings should not be cooled by water or oil water emulsion.
6. The joints of the pipes in the internal cooling system should not be leaky and it is advisable that no cooling is applied.
