QT8-25Automatic brick making machinery :JS500mixer(two shafts and compulsion)+Conveyor belt(8meters)+ Pallets Feeder +Concrete Feeding System+Main machine(QT8-25)+Automatic Stacker+PLC control system+25pieces pallets
Main Technical Specifications of brick making machinery | |
Standard | JC/T920-2003 |
Vibration Frenquency | 3600 cycles/minute |
Vibration Pressure | 75KN |
Production/mould | Hollow block(390X190X190mm) 8pieces/mould |
Hollow block(245X115X90mm) 21pieces/mould | |
Solid brick (240X115X53 mm)32 pieces/mould | |
Paver brick(200X100X60mm)24 pieces/mould | |
Cycle Time | 16-25seconds |
Production/day(8hours) | Hollow block (390×190×190 mm) 9300-11000pieces |
Hollow block (245×115×90 mm) 24000-26000pieces | |
Solid brick (240×115×53mm) 60000-70000pieces | |
Paver brick (200×100×60 mm) 27000-30000pieces | |
Motor Power | 29.4Kw |
Water Consumption | 5-10T |
Number of workers | 7-10worker |
Space of Ground | 5200 square meter |
Gross Weight | 10.2T |
Machine Dimension | 11700×3800×2900mm |
Main materials | Cement,crushed stone dust,gravel,sand,coal fly ash,iron/aluminium dust,crushed cinder and some industrial wastes |
Products of machine | Hollow blocks,Solid bricks,Pavers,Kurbstones,Slope blocks,slabs, interlock bricks and so on. |
Main Features of brick making machinery :
A. The machine can work automatically by itself with PLC control system,which is Siemens.And if there are something wrong with the machine, PLC can tell problems.Good design and easy operation make you feel the greatness of technology.B. The advantages of Germany Siemens PLC Control System and siemens touchable screen.
- PLC can control the block making machine automatically without any labour.
- PLC can be set parameters of different materials.
- PLC can shoot problems directly.
C. The hydraulic parts is imported from Taiwan of China,Japan and Germany.
D. Frame of machine is using super strong steel with special welding techniques.So it is tough and strong.
E High quality of mould:Mould is an important part of machine.The steel is standard materials for making moulds.We have many procedures like adding carbon and boron,back fire for three times, polishing,and so on.And the geomitry of the moulds is standard too.
