PE Pipe Extrusion Line is used to produce PE pipes for water supply and drainage.
PE Pipe Extruding Line is composed of vacuum feeding machine, hopper dryer, single screw extruder, mould, make line co-extruder, vacuum calibration and cooling tank, extended spraying cooling tank, haul off machine, printer, cutter and stack bracket.
PE Pipe Extruding Line is composed of vacuum feeding machine, hopper dryer, single screw extruder, mould, make line co-extruder, vacuum calibration and cooling tank, extended spraying cooling tank, haul off machine, printer, cutter and stack bracket.
Features of PE Pipe Production Line:
1. Barrier type screw, by which the material can get good plasticizing at low temperature but high extrusion output.
2. Barrel with feeding groove, material is 38CrMoAl and nitrogen treated, surface hardness is HRC 65-68, which can has a long use life.
3. Millipore type mould with suitable inner compression ratio which can guarantee to produce high quality PPR pipes.
4. High automatic level. The production line is controlled by PLC(touch screen). All parts, like extruder, haul off unit; cutter etc can be controlled by touch screen synchronously.
Technical Parameter
Model | JBD-PEG32 | JBD-PEG-63 | JBD-PEG160 | JBD-PEG315 |
ExtruderModel | SJ65×30 | SJ65×30 | SJ90×30 | SJ120*33 |
ProducedPipe Specification(mm) | Φ20-Φ32 | Φ40-Φ63 | Φ75-Φ160 | Φ110-Φ315 |
ProductionLine Speed. m/min | 3-12 | 2-8 | 1.2-6 | 0.5-3 |
Compressedair.m3/min. | 0.3 | 0.3 | 0.5 | 0.8 |
Coolingwater flow | 2 | 7 | 8 | 9 |
TotalPower(kw) | 72 | 100 | 160 | 240 |
Photos of the whole line
