Product features
Maintains excellent mechanical stability,dimension stability in the range of temperatures from -270°C to 250°C with short-term run ability at ,,,,the temperatures up to 400;
Strong resistance to radiations and ultraviolet rays;
Resists high mechanical stress during assembly operations;
Excellent electrical insulation properties;
Outstanding resistance to most chemicals, solvents, lubricants and fuels;
Allows space and weight savings;
Excellent Tensile Strength in longitudinal and transversal direction;
UL approved.
Applications
Flexible Printed Circuit and Insulation materials for heat-resistant electricity and cable etc.
Specifications
Thickness:15μm\20μm\25μm\35μm\40μm\50μm
Width: Width:from 0.05 up to 1m.not less than 250mm, deviation of ±1.6mm. According to the customer's requirements, the different size of type can be made.
Length: supplied according to the customer's requirements.
Data form
Item | Properties | Unit | Values | ||||||||
μm | 12.5 | 25 | 30 | 40 | 50 | 75 | |||||
1 | Density | g/cm3 | 1.42±0.02 | ||||||||
2 | Tensile Strength | MD ≥ | MPa | 160 | 185 | 175 | 160 | 155 | 150 | ||
TD ≥ | 155 | 170 | 160 | 150 | 140 | 135 | |||||
3 | Elongation at rapture ≥ | % | 60 | ||||||||
4 | Shrinkage (only for reference) | 150°C 30min ≤ | % | 0.15 | |||||||
400°C 30min ≤ | 2.0 | ||||||||||
5 | Breakdown Strength (48~62Hz) | Average | MV/m | 210 | 210 | 190 | 170 | 160 | 150 | ||
Individual | 190 | 190 | 180 | 160 | 135 | 120 | |||||
6 | *Surface Resistance 200°C | Ω | ≥1.0×1013 | ||||||||
7 | *Volume Resistance 200°C | Ω·m | ≥1.0×1010 | ||||||||
8 | *Dielectric Constant (48~62Hz) | --- | 3.5 | ||||||||
Note:The values noted in above technical specification are given only for our customers' reference and should not be used in writing specifications.
Our Factory Competitive Advantages
*Well Competitive Prices and High Quality Control *Prompt Delivery *Customer's Design and Logo are Welcome *Fit for Gifts and Premiums *Earth-friendly Products *In a Variety of Design *Small Order Acceptable , *OEM Accepted |
About factory:
Jiangsu Yabao Insualtion Material Co., Ltd. was established in 1986, specializing in
producing insulation materials: i.e.
Polyimide film series: | Polyimide Film 6051 Corona-resistant Polyimide Film (CR Film) Polyimide Film with F46 (FEP) Tape |
Adhesive tape series | Polyimide Film with Acrylic Adhesive Tape Polyimide Film with Silicone Adhesive Tape |
Composite material series | Composite material (NHN, NMN) Mica insulation material (mica tape, mica foil and mica board). |
Packing
The tape roll and disc should be rolled up on a pipe core whose internal diameter is about 76mm, and then the tape roll and disc should be packed into a plastic bag with good sealing.
