Label holder for 25 pairs FT module

Main Features
Blocks: 4-pair and 5-pair terminal blocks
Standard: Cat5E transmission speed
Transmission types: switch data/voice transmission type by jumper simply
Specification: general standard specs, fit various bands/standard multimedia case or rack
Cable fit: 22/24/26 AWG (0.4mm, 0.5mm, 0.6mm)
Material: solid engineering plastic (PC)
IDC specification: IDC contact material: phosphor bronze with gold/silver plating over nickel
Contact material: phosphor bronze with (3-50 MIC) gold plating over nickel
Test device: fluke DSP4300
Test: next: 42.9dB/power sum, next: 40dB/attenuation: 0.17dB

Technical Parameters
1.Pulling-out force: tin bronze and silver plating (20-40 uinch), pulling-out force not less than 25N ;
2.Internal diameter of connection wire: 0.4-0.6 mm
3.The performance of anti-burn: PBT (UL94V-0)or anti-burn ABS (UL94V-0),Combustibility achieved GB/T 5169.7-

1985 standard ;
4.Insulated resistance: under standard atmospheric pressure ,Insulated resistance no less than 1,000M ohm

between the two disjunct connections ;
5.Intermediate resistance between the reed terminators: no more than 7m ohm between intermediate reed under

the standard examination condition ;
6.Intermediate resistance: no more than 3m ohm under standard examination condition ;
7.Dielectric strength: according to industry standard
8.Specification:25 pairs
9.Type: connection types
10.insertion Life: durability 200 cycles

Order Data

Item No	Descriptions
TP-1302-25LH	Labelholder for 25 pairs FT module # TP-1302-25

Label holder for 25 pairs FT module