sawdust drying machine is used for disposing a wide variety of materials.It enjoys features of high operation flexibility, good adaptability, large treatment volume.
construction of sawdust drying machine
entrance |
inner plate |
feeder |
motor |
supporter and draft fan |
Operation Principle of sawdust drying machine |
1. wet materials are sent into silo by belt and bucket conveyor, |
2. the material pass through feeding tube into the feed end. The gradient of feeding tube must be greater than the natural angle of materials, so that material can enter into desiccator. |
3.The desiccators' cylinder is an oblique rotating drum. Heat-carrier that enters into the dryer from the low-end can form reflux with the material added from the upper end. |
4.With the rotating of cylinder, materials are carried to the bottom end by gravity. |
5.wet materials obtain heat input of heat carrier to be dried. |
process flow of sawdust drying machine
technology parameter of sawdust drying machine
Model (m) | gradient( °) | rotation speed (r/min) | intake temperature < | Power (kw) | capacity (t/h) | weight (t) |
0.6×6 | 3-5 | 3-8 | 700 | 3 | 1.5 | 2.9 |
0.8×8 | 3-5 | 3-8 | 700 | 4 | 2.0 | 3.5 |
0.8×10 | 3-5 | 3-8 | 700 | 4 | 2.5 | 4.5 |
1×10 | 3-5 | 3-8 | 700 | 5.5 | 3.5 | 5.6 |
1.2×10 | 3-5 | 3-8 | 700 | 7.5 | 5 | 14.5 |
1.2×12 | 3-5 | 3-8 | 700 | 11 | 6 | 14.8 |
1.5×12 | 3-5 | 2-6 | 800 | 15 | 9 | 17.8 |
1.8×12 | 3-5 | 2-6 | 800 | 18 | 12 | 25 |
2.2×12 | 3-5 | 1.5-6 | 800 | 18.5 | 15 | 33 |
2.2×14 | 3-5 | 1.5-6 | 800 | 20 | 15 | 41 |
2.2×18 | 3-5 | 1.5-6 | 800 | 22 | 18 | 53.8 |
2.2×20 | 3-5 | 1.5-6 | 800 | 30 | 20 | 56 |