Brief introduction of Bean Dregs Dryer :
Bean dregs (soybean curb residue) is a kind of bound water, large oil-based materials, water is not easily to remove
We developed a complete equipment of dehydration drying equipment for bean dregs (soybean curb residue)
Bean dregs was dehydrated through high pressure
Most of the water is lost in this way just in a minute
Then the bean dregs enter into the dryer
Bean dregs and the dry fresh hot air moving in the opposite direction under the effect of a special scraping wings (pusher plate) and dry-hot wind
This process is a little long, the temperature is relatively low and the material is running slowly
The dryer is a downstream drying and the outlet temperature is only 40°C
The whole drying process can fully use the thermal energy and the bean dregs even heated so the toasted bean dregs can have a good color, no burning material and low consumption
Mechanical structure and working principle of Bean Dregs Dryer :
Bean dregs dryer consists of the heat source, feeding machine, rotary drum, discharging machine, induced draft fan, discharge devices, and distribution cabinet
The wet material is put into the dryer after dehydration
The material can disperse evenly and contact fully with the hot air in the dryer through the stirring of the plate which is in the roller
Thus quicken the speed of drying, heat transferring and mass transferring
In the process of drying, the material can be sent out by the star unloading valve which is in the other end of the dryer under the action of the gradient plate and the hot mass
The technological and all equipments' parameter, structure of the production line are being careful analysis and verified by the experiment of drying the bean dregs, we fully take into account the large moisture content, high protein levels, big viscous and adopted a series of unique original technology to solve these problem to ensure a perfect drying results
Main features of Bean Dregs Dryer
Main features of Bean Dregs Dryer
High degree of mechanization, large production capacity, and continuous option
Simple and excellent structure, material running smoothly through the cylinder, operating convenience
Less mechanical failure, low maintain charge, and power consumption
Uniformity of drying product is good
Drying production line using a special scattered installations to ensure the dryer's drying effect
Use innovative and unique sealing device, and sophisticated keep-warm system
Reduce the coal consumption of the system effectively
Whole system holds a good performance of sealing
With complete dust removal equipment
No dust spilling
With good operating environment
Whole drying system uses electric centralized control, auto-control of temperature for hot air, high automation and convenient operation
Can join in crushing, mixing, granulating, packing, and other follow-up steps after drying to produce the finished product of bean dregs particle feed
Main technical parameter of bean dregs dryer:
Type (mm) | Gradient (°) | rotation speed(r/min) | input temperature (ºC) | motor power (kw) | output(t/h) | Weight (t) |
Φ600×6000 | 3-5 | 3-8 | ≤700 | 3 | 0.5-1.5 | 2.9 |
Φ800×8000 | 3-5 | 3-8 | ≤700 | 4 | 0.8-2.0 | 3.5 |
Φ800×10000 | 3-5 | 3-8 | ≤700 | 4 | 0.8-2.5 | 4.5 |
Φ1000×10000 | 3-5 | 3-8 | ≤700 | 5.5 | 1.0-3.5 | 5.6 |
Φ1200×10000 | 3-5 | 3-8 | ≤700 | 7.5 | 1.8-5 | 14.5 |
Φ1200×12000 | 3-5 | 3-8 | ≤700 | 11 | 2-6 | 14.8 |
Φ1500×12000 | 3-5 | 2-6 | ≤800 | 15 | 3.5-9 | 17.8 |
Φ1800×12000 | 3-5 | 2-6 | ≤800 | 18 | 5-12 | 25 |
Φ2200×12000 | 3-5 | 1.5-6 | ≤800 | 18.5 | 6-15 | 33 |
Φ2200×18000 | 3-5 | 1.5-6 | ≤800 | 22 | 10-18 | 53.8 |
Φ2200×20000 | 3-5 | 1.5-6 | ≤800 | 30 | 12-20 | 56 |
Φ2400×20000 | 3-5 | 1.5-5 | ≤800 | 37 | 18-30 | 60 |
Φ2800×15000 | 3-5 | 1.5-5 | ≤800 | 40 | 20-35 | 72.5 |
Φ2800×18000 | 3-5 | 1.5-5 | ≤800 | 40 | 25-35 | 75 |
Φ3000×20000 | 3-5 | 1.5-5 | ≤800 | 55 | 28-40 | 78 |
Φ3000×25000 | 3-5 | 1.5-5 | ≤800 | 75 | 32-45 | 104.9 |
