Product Description
S52 Series Centrifugal Separator Renewable Machine
The machine uses a permanent magnet permanent magnet block --- as magnetic source, for the circular arrangement of the magnetic pole, permanent magnet block is a special kind of powder metallurgy products are made of strontium ferrite ---; For the removal of sand mixed with the old ferromagnetic inclusions beans such as iron, nails, castings, such as flash devices barbed fly.
The machine is mainly used for foundry resin sand regeneration. Has a compact, reliable, easy maintenance, low energy consumption, recycling effect is good.
The aircraft structure by the same number of units along the vertical direction of the thread form. After purification of the sand and shot down from the hopper to the feed by the disk, and then evenly into rotary, high-speed rotation to rotary centrifugal force, sand with 30 ~ 40m / s speed was thrown to the ground fixed to the ring baffle. High-speed impact to the flow of sand on the bezel and rotate along the wall, so that sand, the sand and have an impact and friction between the plate and then into the next cell by the hopper. So after a few cycles, the resin film gradually fall off, to achieve regeneration objectives. High-speed rotation of the wing so that the air inhaled through the falling sand to high-speed flow with.
The machine uses a permanent magnet permanent magnet block --- as magnetic source, for the circular arrangement of the magnetic pole, permanent magnet block is a special kind of powder metallurgy products are made of strontium ferrite ---; For the removal of sand mixed with the old ferromagnetic inclusions beans such as iron, nails, castings, such as flash devices barbed fly.
The machine is mainly used for foundry resin sand regeneration. Has a compact, reliable, easy maintenance, low energy consumption, recycling effect is good.
The aircraft structure by the same number of units along the vertical direction of the thread form. After purification of the sand and shot down from the hopper to the feed by the disk, and then evenly into rotary, high-speed rotation to rotary centrifugal force, sand with 30 ~ 40m / s speed was thrown to the ground fixed to the ring baffle. High-speed impact to the flow of sand on the bezel and rotate along the wall, so that sand, the sand and have an impact and friction between the plate and then into the next cell by the hopper. So after a few cycles, the resin film gradually fall off, to achieve regeneration objectives. High-speed rotation of the wing so that the air inhaled through the falling sand to high-speed flow with.
